[Bimmer]

English NCSExpert 4.0.1 and EDIABAS 7.3.0.5 with v52.0.4 files already Installed -- 6/2014

Please read the post FULLY first before requesting for the link and password.

1) If you have not already introduced yourself to the forum please do so as all requests will be ignored if not.
2) Do not post on my profile requesting access, they will be ignored


All I ask is to treat my shares with respect for the time and effort I put into this and please do not share or post the link or password on this forum or any other forum as non-GA members can also view them and share with other forums as well. If it this is suspected I will quickly remove the links and will be reported to GA staff authorities. Thank you for understanding




E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E89/E90, R50, R56




This compression contains folders of NCSExpert and EDIABAS already installed with v52.0.4 coding files and ECU files. I recommend backup existing folders by renaming them (i.e NSCEXPER_OLD, EDIASBAS_OLD) Then copy the new folders to your C Drive.

C:\NCSEXPER
C:\EDIABAS

Please remember to change your ediabas.ini and obd.ini after extraction to reflect your PC's configuration or your will not be able to connect your interface to the vehicle.




K+DCAN Cables and GOOD QUALITY ICOM's are available... PM me for details!!

(Tnx)

ASK for pass in PM ONLY!!!

Cheers!!

[Bimmer]

Please NCSExpert 4.0.1 and EDIABAS 7.3.0.5 and pass thanks

Hi mate,

Thank you for your interest in my share. But please read my post thoroughly before posting on my thread requesting for passwords and links. You will see near the bottom in big red bold letters to ask for passwords by PM only. Please take a moment and read my full thread. While you are at it maybe take a moment to read the Forum Rules here... You will notice rule#7... "7: DO NOT Ask for passwords on the thread / post / forum (ONLY BY 'PM' = 'PRIVATE MESSAGE')" Breaking forum rules can lead to being banned from the forum permanently. Just a reminder to all... please read each member's thread carefully before replying with requests... they took the time to write, please show the same respect and READ!!

Thank you!!

Cheers!!

---

Please press the and buttons if you found this helpful.

[Dren1977]

Please NCSExpert 4.0.1 and EDIABAS 7.3.0.5 and pass thanks

Why are you even bothering with this???? Newer version is here: http://garage-automotive.com/showthread.php?tid=6140