[lagas]

you have 3 types of emmc on omap board. micron, sandisk, toshiba
the sizes of blocks are different.
for micron memory need remove additional transistor.
if your emmc size are bigger there are no problem, but if smaller then you cant write.

[Pedrom92]

I have a micron and a SanDisk in both I've managed to write, I've managed to download some dumps from Baidu with the help of the TCP443 user.  
We have some more files that I'm not sure what they are for.  
I will upload and post here.
After removing the resistors I will have to get at least 2 new ones that you are taking out were damaged.

[Pedrom92]

Hello, link to download NBT dumps, for me it didn't work I don't know what could have done wrong but the problem continues "NO SIGNAL"

Thanks

[megalo84]

I tried to read emmc in nbt hw07, but i can't see the hdd drive, i also removed the resistors but nothing happens. 

where am i wrong? Thanks

[Pedrom92]

Have 2 EMMC in same situation.

[CodeDoc]

which soft use to read those emmc. tnx

[Pedrom92]

which soft use to read those emmc. tnx

Diskgenius.
Have 3 boards with mícron remove all resistors write dump but not solve problem. Only have recover one with SanDisk.
I try all dumps but only see "no signal".

[CodeDoc]

which soft use to read those emmc. tnx

Diskgenius.
Have 3 boards with mícron remove all resistors write dump but not solve problem. Only have recover one with SanDisk.
I try all dumps but only see "no signal".

tnx for info,mine is not broken i want to make backup

[Pedrom92]

What chip have? Micron SanDisk or Toshiba?

[CodeDoc]

at my board is micron, i try to read witd sd card usb adapter but not regonise which resistor need to be removed?