Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
1f2108 dme incorrect data record variant monitoring
|
07-02-2022, 05:33 AM,
Post: #1
|
|||
|
|||
1f2108 dme incorrect data record variant monitoring
Hello colleagues,
I have problem with DME F07 N55 2010. After unlocking CAS via OBD with BIMMER TOOL (to make a new key). DME error "1f2108 dme incorrect data record variant monitoring". The car can start, but it's sluggish. I did the below but the problem is still not resolved. 1. Change DME working hours to 0 using autohex. 2. Replace other CAS. 3. Clone DME, CAS from 1 similar car F07. 4. Coding FDL power class DME, CAS. Any help is appreciated, willing to pay if someone comes up with a decent solution. Thank you. - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
07-02-2022, 06:24 AM,
Post: #2
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
After TAL calculating DME HWEL is correct in esys or program want to replace HWEL?
|
|||
|
|
|
07-02-2022, 06:40 AM,
Post: #3
|
|||
|
|||
RE: 1f2108 dme incorrect data record variant monitoring
(07-02-2022, 06:24 AM)cursor Wrote: After TAL calculating DME HWEL is correct in esys or program want to replace HWEL?No, Factory Dme. I can flash Dme with e-sys - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
07-02-2022, 07:15 AM,
Post: #4
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
Check with tool32 working hours in ECU. Autohex not do it well on some units.
|
|||
|
|
|
07-02-2022, 07:27 AM,
Post: #5
|
|||
|
|||
RE: 1f2108 dme incorrect data record variant monitoring
(07-02-2022, 07:15 AM)Hoborg Wrote: Check with tool32 working hours in ECU. Autohex not do it well on some units. I didn't test with tool32, but I check with ista it says not zero. It seems autohex has problem with working hours, what tool should I use? - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
07-02-2022, 10:20 AM,
(This post was last modified: 07-02-2022, 10:41 AM by Jumper.)
Post: #6
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
Programm and code CAS4 DME to stock. Delete transport mode or assembly mode to normal mode
|
|||
|
|
|
07-02-2022, 11:26 AM,
Post: #7
|
|||
|
|||
RE: 1f2108 dme incorrect data record variant monitoring
(07-02-2022, 10:20 AM)myfirst1er Wrote: Programm and code CAS4 DME to stock. Delete transport mode or assembly mode to normal mode have programmed cas, dme but the problem is still not solved. - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
07-02-2022, 16:11 PM,
Post: #8
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
Write to Microtronik support, maybe they help.
|
|||
|
|
|
07-02-2022, 21:10 PM,
Post: #9
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
Hello,
Autohex has a problem with that, I had it too. Use a better tool, then it will work. thx - FSC Apple CarPlay for NBT Evo Fullscreen and MGU OEM
- FSC-Set for Retrofit CiC, NBT and NBT Evo with USB 18-11 or remote - FSC Kafas BE, BF and 7E SLI, Kafas4 Speedlimit 11F, WWA 13, FCW 13F - VIM for NBT Evo, install with USB 18-11 or remote - FSC for BMW Apps, Sirius Radio, EPS ------------- Location is Germany |
|||
| Reputation: +1 - jaramillo [+1] | |||
|
|
|
07-02-2022, 21:33 PM,
Post: #10
|
|||
|
|||
|
RE: 1f2108 dme incorrect data record variant monitoring
post your eeprom dump i will set it to 0
![[Image: tyl_add.png]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/tyl_add.png) and Reputation ![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) if I helped you  |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content
