[kuki88]

Hello

I have a problem after replacing the air conditioning control panel, after replacing it and starting it, I have a flashing glass heating button and the buttons on the panel do not work properly.
I tried the IHKA coding with the new cafd but it did not bring any effect.
kai bug i got it
8011CB

Thanks.

[jaramillo]

Tell us more info, same part? which car and model, etc...
Dont pretend to that we guess evething. Dont want to be rude

[kuki88]

Part was borrowed from another car, which also worked with f30 2015, I did not compare the part number and unfortunately I can not do it now because I do not have the original air-conditioning control panel
But everything looked the same to the eye.

Thanks.

[coolerlutz]

I'vv got almost the same issue after retrofitting LED headlights in an F20 LCI. By accident i cutted an wire for the IHKA ECU and after that the LED you mentioned above started blinking.

After a while and some car starts later the problem was solved automatically. I have no glue why.

[bmchicago]

ihka must be coded correctly first and then turn off a/c compressor learn in.

[kuki88]

what do you mean correctly
I do it as always

read fa
active fa
read ecu
select ihka and detect cafd
and code
if I am doing something wrong?

Thanks.

[elthox]

check abl for ihka compressor in ista

[cipi gutuie]

Hello

I have a problem after replacing the air conditioning control panel, after replacing it and starting it, I have a flashing glass heating button and the buttons on the panel do not work properly.
I tried the IHKA coding with the new cafd but it did not bring any effect.
kai bug i got it
8011CB

Thanks.

Thats normal after coding ihka...just start motor and let idle untill the led stop blinking

[kuki88]

I did everything as you said, but there are no changes

I took a picture which exactly doesn't work.

In general, the panel works as it wants, for example, when you press the heating of the seats, the blower increases and many other problems.


Thanks.

[jaramillo]

Are you sure the part is the same? I have seen that behavior when people try to install bizone IHKA, into a no bizone car, just changing the panel