Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G05 Change RAM - NO Connection
|
06-06-2022, 16:24 PM,
Post: #1
|
|||
|
|||
|
BMW G05 Change RAM - NO Connection
Hi,
wanted to change RAM (65127928597) in my G05 (S18A-19-11-534) with a used one from a G14 (S18A-21-03-380). Checked part number before, both cars have 65125A47588 - checked both VIN's. The sticker on the used RAM is 65127927900 but I cannot find this number in ETK. If I connect to car, in ISTA ECU is red - no connection. Is there a solution to tell MGU there is another RAM with a new MAC or how connect this ecus? Regards |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
06-06-2022, 17:43 PM,
Post: #2
|
|||
|
|||
|
RE: BMW G05 Change RAM - NO Connection
You sure you got this number 65127927900 right? I don't see any RAMs with xxxx7927xxx numbers. While your number 65127928597 is correct for RAM 01 mid with SDARS.
|
|||
|
|
|
22-06-2022, 17:28 PM,
Post: #3
|
|||
|
|||
|
RE: BMW G05 Change RAM - NO Connection
First clear old RAM from SVT, then you can see the new one. Sometimes need flash HU with RAM to the same I-level to make it properly working.
|
|||
|
|
|
14-12-2022, 17:19 PM,
Post: #4
|
|||
|
|||
|
RE: BMW G05 Change RAM - NO Connection
Check power supply
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
