[Gabriel87]

Hi guys i need generate eis w211 eeprom from ecu data read with cgdi.
For write with vvdi prog vin WDB2110161A035050
th

Desktop.rar
File Type:
Downloaded:	3 times
Size:	991 bytes

ank you in advance.

[ikrom]

its much beter to virgin your ecu , then learn to your eis by vvdi mb, cgdi, mb c4 etc.

I dont know exactly if cgdi can, but vvdi mb tool in easy will renew your ecu on bench (cans,+,acc,gnd)
then connect to car by obd (connect ecu) , turn on ignition, then in ecu page select personalizate (it will get error - take it easy) , then select activate. done.
Start car. your ecu will have eis vin.
if not - do all again, just when renew ecu, write new vin , then other steps.

easy job by vvdi mb. I think cgdi same functionality.

[decode_cz]

Tell us more what problem you have and in what condition is car.
EZS/keys/ESL are original?

Best regards

[Gabriel87]

Solved swap immo from ecu in eis thank you guys