Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
xDrive - Modification of the drive distribution through coding.
18-01-2024, 21:59 PM,
Post: #31
|
|||
|
|||
RE: xDrive - Modification of the drive distribution through coding.
Done - ask me anything.
Just joined and wanted to chime in here since this thread helped me out in doing an esys-only RWD conversion. Disclaimer: I have an iDrive8 G42 (2023). I know nothing about the F series. (03-04-2023, 19:56 PM)kami2k Wrote: Can somebody explain how to disable Xdrive with Esys? Would be totally great. In my case, my car has an XDrive and RWD variant. I was able to edit my VO's typeschlussel to be that of a RWD variant. Then generate NCDs for the DSC_BRS and DSC_VIP_IB4. In my car doing both of these are important. Doing only one causes errors yielding a "Drive Carefully. Chassis Stabilization." message; and also hurts the integrity of the physics calculations the DSC algorithms use. All in all about 50-70 settings are different. In what I presume to be an "Undefined Parameter" in ProTool, there is a series of hex bytes that represent your typeschlussel in ASCII. This is likely one of the things that results in the "Coding not valid for AWD vehicle." error I was getting while trying to do this all by hand. The DSC_BRS module is protected with certain signature validations (??) on the SWFL/SWFK which I'm assuming are similar to locking my DME. Beware, you're probably blowing e-fuses and forget about your entire warranty when doing this. "For real, real." Assume it's gone. Period. (04-04-2023, 04:48 AM)wjgud123 Wrote:(03-04-2023, 19:56 PM)kami2k Wrote: Can somebody explain how to disable Xdrive with Esys? Would be totally great.Simple... You cannot (04-04-2023, 08:50 AM)user_530d Wrote: Ok. Over 12 years it was not possible with ESYS or whatever’and coding. I've swapped XD/RWD three times and I've driven (HARD) every day in exclusively RWD config for the last ~month. In all three DSC modes. Rain, shine, dry, snow, subzero. Zero errors, codes, or warnings: I am not even an expert. I had about two days of coding experience to make this happen. Please be more respectful....... (02-09-2023, 06:41 AM)filipkozina Wrote: Yes it is the same , that bdc body options doesnt really matter Confirmed: G42 XDrive -> G42 RWD does not require any further changes outside of DSC and Virtual Integration modules. There is an option in the ZF 8HP-51 for AWD and I don't notice an effect with/without it. Perhaps a torque limiting system to keep axles from snapping...? Cheers. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 27 |
8 hours ago Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,058 |
Yesterday, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 158 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 505 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 607 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 245 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 222 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 124 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,745 |
22-04-2024, 11:44 AM Last Post: kwat |
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 467 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content