[yomismo 01]

hansolo
can you answer please thank you
https://cartechnology.co.uk/showthread.p...#pid649203

[kuno24]

@kuno24: Do you know, which parameters have to be coded in the ACSM?

Best regards,
Matt

Don't remember. Add new options to FA and code. No need to guess. If in doubt, code the whole car with the new equipment.

EDIT. Sry, i dont read correctly, that You installed options, not supported by factory. ASCM have 4 CAFs, read and think, nothing to say, .

[hansolo]

Yes, 5DL was never available from factory for a F20.
It would really help if a owner of a F3x with 5DL and 5DP can post the NCD Files of HU, TRSVC and PMA ECU so that I can compare the CAFD and identify the parameters to be changed.

[kuno24]

If change temporary type code to f3x and code?

[hansolo]

Hi guys,

I got it working on my own.
Here the solution in case somebody in the future follows the same retrofit path.

In fact, besides the correct ECU coding there are just 2 parameters, which have to FDL coded to get top-view with PMA2 working.
1. VO code the ECU TRSVC with original FA (F20 LCI2, with 3AG),
and then FDL code the "DID41A3 Default TV Inhibit" parameter from "TV_OFF" to "TV_ON"
2. VO code the ECU PMA2 with original FA (F20 LCI2, with 5DP),
and then FDL code the "TVC" parameter from "nicht verbaut" to "verbaut"

In my case the ECUs needed to go to sleep and after a restart everything worked as intended.

Best regards,
Matt