[hudakmuvek]

Dear Friends,
I have a big problem with MES4.9.
When I connected interface and scan it with F9.
The MES found the interface on COM16, but when I set it and push the "OK", the MES forgot it.
Next time when I restarted it, the MES selected COM1, I don't know why.
I need to set it again.
I'm thinking, the cracked Multiecuscan.exe not working well.
What is your suggestion?

[pupu144]

Dear Friends,
I have a big problem with MES4.9.
When I connected interface and scan it with F9.
The MES found the interface on COM16, but when I set it and push the "OK", the MES forgot it.
Next time when I restarted it, the MES selected COM1, I don't know why.
I need to set it again.
I'm thinking, the cracked Multiecuscan.exe not working well.
What is your suggestion?

Change your interface address to COM1 (in Windows Device Manager)..

[hudakmuvek]

Dear Friends,
I have a big problem with MES4.9.
When I connected interface and scan it with F9.
The MES found the interface on COM16, but when I set it and push the "OK", the MES forgot it.
Next time when I restarted it, the MES selected COM1, I don't know why.
I need to set it again.
I'm thinking, the cracked Multiecuscan.exe not working well.
What is your suggestion?

Change your interface address to COM1 (in Windows Device Manager)..

Okay.
I changed it but when I used it.
If I use the program with yellow adater, it is working well, but when I try to checked Engine menu without yellow adater, the MES frozen and the program closed. It is not stables, I'm thinking about when cracked multiecuscan.exe made a misstake.
The previusly MES, like v4.8 wokring without problem.
I think the Blizzard team need to find other solution for crack.
What are your suggestions?

[pupu144]

Could be a lot of things..
Maybe it's crack.
Maybe your adapter has defective firmware (if it's a cheap ELM327 clone - no wonder).
Maybe it's driver's bug (if you connect via USB).
Try uncracked unlicensed install (current is MES v5.1) if it behaves the same.

If you have pre-2017 car and 4.8 was stable for you - stay on previous version. There is no reason to always have the latest soft. If you do want the latest - buy the license, it's not that expensive.

[hudakmuvek]

Could be a lot of things..
Maybe it's crack.
Maybe your adapter has defective firmware (if it's a cheap ELM327 clone - no wonder).
Maybe it's driver's bug (if you connect via USB).
Try uncracked unlicensed install (current is MES v5.1) if it behaves the same.

If you have pre-2017 car and 4.8 was stable for you  - stay on previous version. There is no reason to always have the latest soft. If you do want the latest - buy the license, it's not that expensive.

okay, I aggre with you, the probram licence is not expesive.
My cable is not Chinesse or clone.
The drive is good working, I tested it.
My car is before 2020.
So I'm thinking I should stay MES v4.8.
Nobody get same issues?

[tony1968]

4.9 scan not work.

[matrix1340]

4.9 scan not work.

run keygen first!!!


copy over included file
start program
enjoy

If you are installing the program for the first time,
be sure to launch it at least once
otherwise the keygen will crash.

[blerim shehi]

4.9 scan not work.

run keygen first!!!


copy over included file
start program
enjoy

If you are installing the program for the first time,
be sure to launch it at least once
otherwise the keygen will crash.

Hi,

Did anyone succeed in using v4.9 and v.5.0 using this guide?
I get error when loading MultiEcuScan.exe "Could not find File"
File name: 'C:\Program Files (x86)\Multiecuscan\MultieCUScan.fxf'
Press continue, then its stuck on loading page.. nothing happens..

[SORRY - SOLVED]

[matrix1340]

4.9 scan not work.

run keygen first!!!


copy over included file
start program
enjoy

If you are installing the program for the first time,
be sure to launch it at least once
otherwise the keygen will crash.

Hi,

Did anyone succeed in using v4.9 and v.5.0 using this guide?
I get error when loading MultiEcuScan.exe "Could not find File"
File name: 'C:\Program Files (x86)\Multiecuscan\MultieCUScan.fxf'
Press continue, then its stuck on loading page.. nothing happens..

[SORRY - SOLVED]

run keygen first!!!

[djwwragg]

Version 4.9 works great for me, following all of the instructions above. Worked first time on Windows 11