Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ford fiesta abs module programming
09-02-2023, 16:53 PM,
Post: #1
|
|||
|
|||
ford fiesta abs module programming
hi to all
i have 2012 fiesta 1.2 i believe it has abs module fault. i would like to know if i can take data from old module to new module with ids without having to do a pats relearn for keys . i don't generally use ids. any help appreciated aroundlocks |
|||
09-02-2023, 17:24 PM,
Post: #2
|
|||
|
|||
RE: ford fiesta abs module programming
If you open the part you can change eprom, immo data is there.but I've seen them exchange with ids of line, but I don't know the procedure, I believe it's in the module and programming, replace abs, it must read the data from the old one and launch it in the new one, follow the procedure.
|
|||
Reputation: +1 - AROUNDLOCKS [+1] | |||
09-02-2023, 23:21 PM,
Post: #3
|
|||
|
|||
RE: ford fiesta abs module programming
hi [b]mecadriano[/b]
yes i thought about i thought about that way but ive never looked inside one and wouldn't know if data in eeprom or mcu/also how many eeproms in module and which to remove. if i can do with ids offline without pats relearn its not a problem. neither is removing eeprom if it can be done that way. i just need to know either way. thank you for replying all help is welcome arounlocks |
|||
10-02-2023, 09:16 AM,
Post: #4
|
|||
|
|||
RE: ford fiesta abs module programming
(09-02-2023, 23:21 PM)AROUNDLOCKS Wrote: hi [b]mecadriano[/b] If use 2nd hand ABS will need to code to immo with IDS |
|||
Reputation: +1 - AROUNDLOCKS [+1] | |||
10-02-2023, 10:30 AM,
Post: #5
|
|||
|
|||
RE: ford fiesta abs module programming
|
|||
10-02-2023, 20:31 PM,
Post: #6
|
|||
|
|||
RE: ford fiesta abs module programming
(10-02-2023, 10:30 AM)AROUNDLOCKS Wrote:I don't know how to do that only use factory tools(10-02-2023, 09:16 AM)fraserauto Wrote: If use 2nd hand ABS will need to code to immo with IDShi is it possible to open abs module and is immo data in the eeprom . |
|||
Reputation: +1 - AROUNDLOCKS [+1] | |||
11-02-2023, 23:31 PM,
Post: #7
|
|||
|
|||
RE: ford fiesta abs module programming
(10-02-2023, 20:31 PM)fraserauto Wrote:if module is faulty and needs changing and a new one programming i think it will need 2 keys to relearn pats so i have to make a new key as only 1 key for the car(10-02-2023, 10:30 AM)AROUNDLOCKS Wrote:I don't know how to do that only use factory tools(10-02-2023, 09:16 AM)fraserauto Wrote: If use 2nd hand ABS will need to code to immo with IDShi is it possible to open abs module and is immo data in the eeprom . and will also need incode for the immo and then program new module to car. i shall remove and have a look inside of module and see if it has internal fault as it needs changing anyway after saving asbuilt data as a backup/ i shall keep you updated on my findings and outcome and thank you for your knowledge aroundlocks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content