[Moller Diagnostik]

Hello friends

Can someone help me.
I have a problem with vw t5.The car is equipped with speed limiter to 100km/h.I dried to remove the limiter by vcds but it is not working.I see engine electronics adaptation channel 14 is the customer speed limiter what is set 190 km/h before it was 100km/h.And i see speed limiter by law what is set 250km/h.But the van is not going over 100km/h.
Is the speed limiter in flash or in eeprom file ?
If it is on flash then can someone help me to modify the map ?

Engine:BNZ
Hardware:070906016CF
EDC 16U31
Read with mpps clone version 16

tanks in advance

[darek_naprawa]

V max is the EEPROM.

[Moller Diagnostik]

Hy

But is the any way to read edc 16 eeprom from obd2 connector ?
What tool to use?Or the only way is to remove the ecu ?

Tanks in advance

[darek_naprawa]

Vag dash can read the OBD eprom, it also has the option to change the speed limit.

[betrescudan]

Or you can use ecusafe for test if it work to change speed limiter

[autoraedarum]

If set the speed limiter in adaption channel, there is a login to remove that. I am not on my PC. On monday i can tell you this login

[Moller Diagnostik]

If set the speed limiter in adaption channel, there is a login to remove that. I am not on my PC. On monday i can tell you this login

Tanks for answer
But the login is 12233

[autoraedarum]

No, this is not the right one

---

Before you can see the speed limiter (HGB) you must login with 12233

If you see your HGB in adapt channel 18, the login is 20973

Adapt channel 07, the login is 28575 (legaly HGB)
Adapt channel 14, the login is 11971 (costumer HGB)

I have done sucessfull in T5 2009

[teerak2uk]

But isn't there 2 options of customer requirement and legal requirement of which only customer requirement can be done by vcds legal requirement I'm led to believe options is only remap (new ecu if dealer does it)

[Moller Diagnostik]

Hello Friends

Problem solved
There were no speed limiter set by the engine ecu.There was a "Y" wire between the accelerator pedal.There was a electronic box.And the speed signal was coming from tachograph to the electronic box between accelerator module.I removed the "Y"wire .Now the car is going over 100km/h

Tanks for your help