Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
30-10-2018, 21:35 PM,
Post: #161
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(30-10-2018, 17:25 PM)simonchs Wrote:(29-10-2018, 09:41 AM)Spirit5676 Wrote: Well I'm an IT tech, so those thing didn't look right to me. I assume we need the DHCP for control modules in the car not the laptop/ICOM itself. Laptop/ICOM won't be restarting during the update, so there is no need for them to get new IP's. Modules of the car will be restarting so I assume they need to get new IP's during update. That clears it up quite a bit. I was wondering why there was gateway set since the traffic won't leave the subnet as you said. I was also wondering why people were saying to set the DHCP on ICOM and laptop. I prefer static IP's on use like this. So the ROUTER_0 in DHCPSRV.INI isn't needed either. That makes sense to me. Thank you. |
|||
29-10-2019, 08:32 AM,
Post: #162
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(27-06-2016, 01:19 AM)jaramillo Wrote: Hi everyone, I have one, maybe stupid question Once we set up connection with router like you described, which connection type should we use in esys (e.g., Connection via gateway, via ICOM, via VIN, etc.). Should it be via ICOM with IP: 192.168.68.85:50160? |
|||
25-05-2022, 01:03 AM,
Post: #163
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(01-08-2015, 04:51 AM)Cybertronic Wrote: I had the same issue. You need to connect your Icom Next through a router and your laptop. In your router type your laptop IP address and save it. Without a router you cannot update Kombi or HU-H with Icom next connect direct. I can walk you through it if you are having problems. |
|||
28-05-2023, 12:36 PM,
Post: #164
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Have got issues updating on MOST after latest firmware update.
Router dhcp is set to 192.168.0.1 sub 255.255.0.0 with pool from 1-199, icom to dhcp will set to 192.168.0.150. Used to work fine for programming on most, but now doesnt work any longer. Anyone knows what the issue might be? - Remote coding & programming - F 8HP45/50/70/75 ISN reset remote
- Remote ECU tuning MEVD17 + EDC17 + MGD1 ECUS + 8HP EGS BMW/MINI - M2/M3/M4 CS, CSL OR GTS Flash F8x G8x - 8HP Alpina EGS flash F & G remote - EVO ID4 to ID6 flash - Apple Carplay activation Skype: live:fatalix - Whatsapp: PM for details |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content