[rana]

F32 need to code the tire pressure to be ok with less BAR and be green 
is there any way to coding that 
thank you so much

[Beard]

Hello.
Inflate the tires to whatever pressure you need.
then go to the on-board computer, select - vehicle status, - tire pressure, - reset tire pressure, Nothing else is required. Then the car will remember your tire pressure while driving.

---

Do not forget!
You have a camber of the rear wheels minus one degree for thirty minutes - This is ideal! When the tires are flat, the rubber is crushed, it turns out that with such a camber and low tire pressure, you will ride on the inner sidewall of the rear tires.
the sidewall wears out quickly, - the tread remains intact.
******************************************************* **********

---

The larger the radius of the wheels, the wider the rims and the wider the tires, the higher the pressure in the BMW tires should be!

[rana]

Hello.
Inflate the tires to whatever pressure you need.
then go to the on-board computer, select - vehicle status, - tire pressure, - reset tire pressure, Nothing else is required. Then the car will remember your tire pressure while driving.

---

Do not forget!
You have a camber of the rear wheels minus one degree for thirty minutes - This is ideal! When the tires are flat, the rubber is crushed, it turns out that with such a camber and low tire pressure, you will ride on the inner sidewall of the rear tires.
the sidewall wears out quickly, - the tread remains intact.
******************************************************* **********

---

The larger the radius of the wheels, the wider the rims and the wider the tires, the higher the pressure in the BMW tires should be!

no not working if pressure go less then car will not confirm tires as green 
is there coding way to fix that