[____ANGEL___]

Sorry don’t know what happened …


Please tell me how you did the split up… what’s the order of the split pp,dd pddp etc.

Autotuner will not initialize at all. since last flash with error it wont go.

---

Sorry don’t know what happened …


Please tell me how you did the split up… what’s the order of the split pp,dd pddp etc.

my iflash1 is too short, try the other file
edit: fixed

what do you mean with what is the order? File are named with iflash0 iflash1 dflash0 dflash1, flash it and test in car for correct identification, if you have a correct ident you can fix easily the rest with esys

So I guess a file that’s too short will utterly ruin an ecm

So…. I tried on another ecm on the bench and it works so it’s the ecm that took those bytes to the dome.

I'm not sure that i understood but if you can't write anymore that ecu you can do it in boot mode and restore

So did you solved or not? I hope yes...

[Jordiano]

It won’t restore in boot either . It will not read write or even identify

[____ANGEL___]

That's really strange, but the car starts now? it's solved?

[Jordiano]

That's really strange, but the car starts now? it's solved?

no not at all ..... ecu is dead...... i lashed another ecm 17.2 with your flash files again and still same thing fuel pump goes forever. ews authentification failed ...its the wrong version ...

[____ANGEL___]

it's calculated with esys on vin that you've posted, could'nt be wrong but i believe you that it's not working, but i don't know why. I'm leaving only the dump from victorysatgr that is good for sure because was read with tool

what mevd do you have in attachment?