Possibly Related Threads…

***thecarfixer*** · 29-06-2023, 15:22 PM,

See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up.

Only problem is, ISTA D shows the EGS and there’s a no comms from EGS fault. The drive type on the car info is wrong too.

My question is: is that populated from the car somewhere, or is it stored in a database against the VIN?

I’d like to tidy that part up, if possible..

***Node*** · 29-06-2023, 15:36 PM,

(29-06-2023, 15:22 PM)thecarfixer Wrote: See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up.

Only problem is, ISTA D shows the EGS and there’s a no comms from EGS fault. The drive type on the car info is wrong too.

My question is: is that populated from the car somewhere, or is it stored in a database against the VIN?

I’d like to tidy that part up, if possible..

Does this answer your question? From ISTA's diag database.

P.S. Have you updated FA in the car??? Could help.

***thecarfixer*** · 29-06-2023, 15:59 PM,

I did update the FA on both the CAS and FRM (verified but I’ll check again)

Looking at your pic, that seems to corroborate the idea that the assembly info in the ista database carries that build data..

***bmchicago*** · 29-06-2023, 21:59 PM,

not necessary to clean that data up. If all control units report no errors with missing EGS and FA and coding were done correctly, then move on to the next job.

***____ANGEL___*** · 29-06-2023, 22:49 PM,

Ista d uses vin db to identify, you can not correct this. The real check is in ista p for your car.

***thecarfixer*** · 30-06-2023, 06:02 AM,

Thanks, that makes sense. No errors other than the No comms to EGS, but that’s fine..

***Inerceptor*** · 30-06-2023, 10:56 AM,

Update with the correct SVT and MSM (in esys)

***Node*** · 30-06-2023, 11:02 AM,

(30-06-2023, 10:56 AM)Inerceptor Wrote: Update with the correct SVT and MSM (in esys)

R55 with Esys???? Would REALLY like to see that biggrin

***Inerceptor*** · 30-06-2023, 11:51 AM,

(30-06-2023, 11:02 AM)Node Wrote:
(30-06-2023, 10:56 AM)Inerceptor Wrote: Update with the correct SVT and MSM (in esys)

R55 with Esys???? Would REALLY like to see that

Yes)) time for vacation)))
Confused with F5x.

For R55 use older version ISTA (ex. 4.10-4.19) or change vin giggle

***thecarfixer*** · 30-06-2023, 20:17 PM,

Haha, gotcha. I’ll file it under ‘ignore’. And I’m sure the naysayers would just say buy a manual car..

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Reset for GA8P70H F10 Hybrid transmission	willisodhiambo	20	2,308	9 hours ago Last Post: AnthonyGharib
	ISTA+ 4.47.1x Install Files - MEGA	shawnsheridan	42	4,087	Yesterday, 19:21 PM Last Post: 2013m5
	ISTA+ 4.47.2x Install Files - MEGA	shawnsheridan	6	594	04-05-2024, 23:04 PM Last Post: 2013m5
	ista 4.46 Standalone	kiranabc	104	12,942	04-05-2024, 18:43 PM Last Post: kiranabc
	ISTA 4.47 test plan and error delete not available	bmwm3power	7	467	04-05-2024, 15:49 PM Last Post: bmwm3power
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	38	7,823	04-05-2024, 01:23 AM Last Post: jhon006
	Ediabas 7.6.0 for ISTA 4.46	dfb	2	414	03-05-2024, 07:56 AM Last Post: duke99
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,713	673,354	01-05-2024, 09:50 AM Last Post: Sedoy
	ista + 4.47 install	simplextibi	1	499	30-04-2024, 12:22 PM Last Post: slackers
	ISTA 4.46.xx problems and possible solution	Sedoy	98	12,487	27-04-2024, 09:48 AM Last Post: egyclick

Contact Us