[redog4dy]

Hello,

I attached my kombi3 and bco for K67 S1000RR, anyone can point me to where i can unlock some feature? i would like to unlock as below:
Race pro connectivity
Level 5 heated grips
16000 RPM

I added bco maybe anyone can figure out how to disable error of plate number light(there is led with error)

Thanks in advance,
Adrian

PS: in my kombi, i figured out how to change vehicle image /M , startup /M, if anyone interested.

[EngineerX]

Heated grips are stored in BCO and 16000rpm need to be changed by tiping them with HEX

[redog4dy]

Update:
I managed to code 16 000 RPM + heated grips 5 levels( it was in BCO like you advised) .

Still looking to code race pro connectivity .

If anyone can see anything, i'll wait..

Regards,
Adrian

[EngineerX]

Update:
I managed to code 16 000 RPM + heated grips 5 levels( it was in BCO like you advised) .

Still looking to code race pro connectivity .

If anyone can see anything, i'll wait..

Regards,
Adrian

Adri you will need special FSC for DME

[redog4dy]

There is special fsc for connectivity in race pro?
Anyone that can provide this fsc?

[BMWS1000RR]

FSC are VIN coded.

The Race Mode Pro coding goes into the ABS module, Cluster ( KOMBI ) and the DME ( ECU )

You have to buy it from BMW Motorrad. It is $500

[redog4dy]

FSC are VIN coded.

The Race Mode Pro coding goes into the ABS module, Cluster ( KOMBI ) and the DME ( ECU )

You have to buy it from BMW Motorrad. It is $500

Wow, so much? 
I think it's too expensive..