Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Direct Ethernet to OABR cable for nbt evo coding
02-11-2023, 07:21 AM,
Post: #11
|
|||
|
|||
RE: Direct Ethernet to OABR cable for nbt evo coding
actually many people including me do CIC-NBT-EVO coding with E-series retrofit over Ethernet, I personally do always Ethernet to OBD2 harness for headache free coding for the owners.
|
|||
02-11-2023, 11:47 AM,
Post: #12
|
|||
|
|||
RE: Direct Ethernet to OABR cable for nbt evo coding
(02-11-2023, 03:29 AM)pshoey Wrote: This is a pointless thread - coding is NOT done over ethernet - OABR plays no part in coding - coding is ALWAYS done over CAN on F/G series - hence you should connect ethernet to GW which in turn has CAN connected to EVO Not true. It's possible to connect to the EVO with OABR to Ethernet cable. You will need to connect to gateway in E-Sys. |
|||
02-11-2023, 16:17 PM,
Post: #13
|
|||
|
|||
RE: Direct Ethernet to OABR cable for nbt evo coding
Gateway you mean 169.254.199.99:6801 ?
I did it many times but still not luck, can’t see nbt2 in esys. Bench wiring has can wakeup also zgw1 (try to learn, please dont ask me to change/up to zgw2 - i know this way will 100% see nbt2) |
|||
27-02-2024, 12:59 PM,
Post: #14
|
|||
|
|||
RE: Direct Ethernet to OABR cable for nbt evo coding
OK. A lot of time has passed, but I’ll write. Everything is simple here! NBT2 can indeed be encoded without ZGW by connecting via OABR directly .199.99. However, it must be woken up by applying a 12F signal to CAN2. Everything will work. However, only for coding. When flashing the firmware, NBT2 will still request ZGW(
|
|||
01-03-2024, 07:41 AM,
Post: #15
|
|||
|
|||
RE: Direct Ethernet to OABR cable for nbt evo coding
(30-10-2023, 16:32 PM)HU_man Wrote: Hi, You Need Wake-up emulation on KCan2 and ID is required to wake up NBT2 (not ZGW wake-up emulation) because in this case there is no ZGW. Retrofit success 2VB,2TB,248,5AC,5AG,5AT,5AR,5DL,5DP,609,688,6AK,6CP,6NS,6WB,610,710,8TH
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw e53 dsc coding | hero3838 | 4 | 44 |
09-05-2024, 20:04 PM Last Post: hero3838 |
|
coding 2018 bmw bike with ncs expert | carlosabh71 | 13 | 1,584 |
09-05-2024, 14:25 PM Last Post: TheNine90 |
|
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 2,931 |
09-05-2024, 11:20 AM Last Post: Vojno |
|
BMW E71 EGS coding 8HP70 used | BS68 | 5 | 349 |
08-05-2024, 11:19 AM Last Post: EngineerX |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 86 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 90 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,133 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 248 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 611 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 680 |
24-04-2024, 22:47 PM Last Post: Mugga |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content