[Blondy]

Hey Guys/Girls,

Can someone give me a short Info about how to code a larger Batterie with E-Sys in F11?

Original 80AH is coded.
Installed now 95AhH.

Never worked with E-Sys before, first use now. (Full SP Date is here)

Thank You.
Greets

[Homersbud]

just use ista - you just need to register the new battery - ista gives you all the info you need to complete the replacement. chk youtube. don’t need esys for a new battery.

[Pommie]

You can code a different/new battery with ESys but it still needs registering using ISTA … plenty of guides on the net …

[Blondy]

I registered the new battery with Ista, but for bigger ones Ista said I need Ista-p, which I don't have?

So I would like to code the 95AH with E-Sys.

[Node]

Something here is NOT correct.

If it's 2001 then it's NOT F11.
If it's F11 then it's NOT 2001. But then you go to retrofits in ISTA (coding-only) and retrofit a bigger battery. ISTA-P is needed for E series only. Unless your ISTA is from 2011 too.

[Blondy]

Upps Sorry typing error: F11 6/2011

My Ista-D isn't very new, but something newer then the Rheingold (10/2013) I have on Desktop PC. 

So You say, ISta-D can do it in retrofit-menu but not in the battery-change-menu?

[user_530d]

With ISTA you need to change capacity in "vehicle modification>retrofit menu" and for register the new one the service function "battery change".
The easiest way is change E-Wort in ESYS. In your case for 95ah change to A090. Yes 90ah, in F10 you can't register 95ah, must use lower one. Write VO to car and code CAS with this VO.
Then use ISTA and register the new battery.

[Blondy]

Thank You, I will try next, in retrofit-menu, and report.

My Ista 4.09.13 (12/2017)

Weired, if it's really not working in menu1, but then in menu2

[Blondy]

Did not work. I got these message every time, did enough Tests.

Could it be my connection? At the end of the Vehicle Test I always have some connection errors with that Car, but all Ecus are there. 

I still use my USB-OBD2 Cable, maybe I need the ENET Connection? (Bought Cable for ESYS last)

[user_530d]

Your Programming System is not ready. You have installed SDP