Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
is my ecu dead
16-12-2023, 10:12 AM,
Post: #11
|
|||
|
|||
RE: is my ecu dead
(16-12-2023, 09:04 AM)BlackCaddy Wrote: Hi only tools that read this ecu are kt200 and ktag when it crashed so only 2 tools,also extflash has been written to not intlflash or eeprom they are untouched,my post on other forum intro is the same as here no different,I just need help to repair... You have all the information that you need in my last two posts friend, what you do with it is your affair. Good luck Br All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - Abou-raffik [+1] | |||
16-12-2023, 12:04 PM,
Post: #12
|
|||
|
|||
RE: is my ecu dead
I think your ECU is dead, it should not get as hot as you said in post 1, did you use an external power source for the obd read ? I recently destroyed an ECU on the bench because I plugged in the wrong power supply, I give 18 volts by mistake, car wouldn't start and no Comms through obd but on the bench I could read files no problem, I had to get another ECU
|
|||
Reputation: +1 - Abou-raffik [+1] | |||
16-12-2023, 16:57 PM,
Post: #13
|
|||
|
|||
RE: is my ecu dead
no ecu is fine it starts with 1.4 bakkie immo off file just not reving up on 1.6 car
|
|||
16-12-2023, 17:03 PM,
Post: #14
|
|||
|
|||
RE: is my ecu dead
check all components in the good ecu with multimeter and compare readings with components on bad ecu, you might find the burned component
|
|||
Reputation: +1 - Abou-raffik [+1] | |||
17-12-2023, 00:50 AM,
Post: #15
|
|||
|
|||
RE: is my ecu dead
|
|||
Reputation: +3 - al70 [+1] , raffy haddad [+1] , pinotec [+1] | |||
17-12-2023, 06:57 AM,
Post: #16
|
|||
|
|||
RE: is my ecu dead
|
|||
17-12-2023, 19:31 PM,
Post: #17
|
|||
|
|||
RE: is my ecu dead
|
|||
17-12-2023, 20:26 PM,
Post: #18
|
|||
|
|||
RE: is my ecu dead
(17-12-2023, 00:50 AM)dimon9555 Wrote: You have the most important problem in eepromIs that genuine iprog + ? or 70-100 usd china tool ? Br All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - Abou-raffik [+1] | |||
18-12-2023, 01:32 AM,
Post: #19
|
|||
|
|||
RE: is my ecu dead
(17-12-2023, 20:26 PM)ROD-BENDERS Wrote: Is that genuine iprog + ?This is an Iprog program without hardware, with a hand-made calculator (17-12-2023, 19:31 PM)BlackCaddy Wrote: can you explain further what you mean by eeprom is in bootmode When you press in Kess, Mpps, Odis or any other device to write flash, the ECU automatically enter the programming mode and writes into the eprom what is in the boot mode, when the all programming process occurs without error, then at the end the boot mode automatically changes into a normal mode and ECU starts to work fully. An alternative way is to fix the eprom - if the Flash and MPC are not damaged (your MPC is stock, the Flash is not stock, there are differences with some tuning) In the boot mode, usually the ECU responds to diagnostics(VCDS for example), but you can only see identifiers (no errors, no coding, no measurement blocks, all other ECU in car write a communication error with this ECU) I see by the number of programmings there 3 programmings, there 2 successful . If a person needs a solution, write in Skype...
|
|||
18-12-2023, 06:26 AM,
Post: #20
|
|||
|
|||
RE: is my ecu dead
So iprog + was even cheaper than china.. nice
the op has just been given files by keller on mhh so we will soon find out if the ecu is still alive All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content