Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ SAAB T8 P0606 PROBLEM AFTER CLONING
29-12-2023, 17:48 PM,
Post: #1
|
|||
|
|||
SAAB T8 P0606 PROBLEM AFTER CLONING
Hello.....
i clone an ecu from saab t8 trionic with ioterminal, (only flash....) both ecus have same hw number.... car starts, but after 20-30 secs engine idle badly and check engine light goes on with P0606...... if i delete that dtc engine works great for 20-30 secs and again the same dtc....... (i read the ori ecu and donor with trionicCanflasher, the MPC flash is same.......) any idea if is ecu hw problem or sw???? thanks.... |
|||
29-12-2023, 18:53 PM,
Post: #2
|
|||
|
|||
RE: SAAB T8 P0606 PROBLEM AFTER CLONING
defective programming of the ECU or defective ECU
Br All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - Abou-raffik [+1] | |||
29-12-2023, 19:04 PM,
Post: #3
|
|||
|
|||
RE: SAAB T8 P0606 PROBLEM AFTER CLONING
|
|||
29-12-2023, 19:14 PM,
Post: #4
|
|||
|
|||
RE: SAAB T8 P0606 PROBLEM AFTER CLONING
Try diag and put ecu back to basic settings.. but i suspect more problems are at work
All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - Abou-raffik [+1] | |||
30-12-2023, 11:32 AM,
Post: #5
|
|||
|
|||
RE: SAAB T8 P0606 PROBLEM AFTER CLONING
solved........ thanks......
|
|||
30-12-2023, 11:36 AM,
Post: #6
|
|||
|
|||
RE: SAAB T8 P0606 PROBLEM AFTER CLONING
When I clone using the terminal, I then upload the same thing using Kess to calculate the sum and it is always fine.
|
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
mercedes EIS W246 PROBLEM | bouizanne | 2 | 42 |
03-05-2024, 08:41 AM Last Post: bouizanne |
|
VW PCR 2.1 cloning ECU | viytik | 5 | 231 |
22-04-2024, 18:59 PM Last Post: ROD-BENDERS |
|
CAS2 To CAS3 - Data transfer - Coding FA Problem | Semi14 | 2 | 148 |
18-04-2024, 07:10 AM Last Post: Semi14 |
|
Golf 5 Immo problem after swap Vistreon -> VDO | kafkaesk | 22 | 849 |
16-04-2024, 14:19 PM Last Post: kafkaesk |
|
cheeroke 2013 skim problem | ka_rai | 0 | 50 |
01-04-2024, 14:50 PM Last Post: ka_rai |
|
Mercedes C180 immo problem | al70 | 5 | 218 |
01-04-2024, 10:01 AM Last Post: ROD-BENDERS |
|
Volvo XC90 CEM problem | pimpammm | 0 | 99 |
28-03-2024, 18:52 PM Last Post: pimpammm |
|
Solved ✔ Problem Mini Cas3+ akl | samirfe | 4 | 242 |
21-03-2024, 15:01 PM Last Post: samirfe |
|
Solved ✔ Cas2 up cas3+ problem | johann74270 | 1 | 126 |
19-03-2024, 23:51 PM Last Post: johann74270 |
|
Beetly 5C 2012 immo/dash problem | Arczi26 | 2 | 128 |
13-03-2024, 14:51 PM Last Post: Arczi26 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content