Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Carprog a1 adapter
15-11-2015, 22:24 PM,
Post: #11
|
|||
|
|||
RE: Carprog a1 adapter
Need to do this r5 on mine is wrong, il test pin16 when i do the mod
|
|||
16-11-2015, 09:09 AM,
Post: #12
|
|||
|
|||
RE: Carprog a1 adapter
(15-11-2015, 22:24 PM)tremo1984 Wrote: Need to do this r5 on mine is wrong, il test pin16 when i do the mod let me know how you get on with this A1 mod as I,m gonna do mine soon along with mainboard mods If mine or others posts and info are helpful please give thanks/rep
|
|||
18-11-2015, 22:28 PM,
Post: #13
|
|||
|
|||
RE: Carprog a1 adapter
Done in now mate just replaced the resistor with a cap and added the wire to pin 16 hardware test shows its all OK.
|
|||
18-11-2015, 23:21 PM,
Post: #14
|
|||
|
|||
RE: Carprog a1 adapter
(18-11-2015, 22:28 PM)tremo1984 Wrote: Done in now mate just replaced the resistor with a cap and added the wire to pin 16 hardware test shows its all OK.brilliant this why I wanted to build A9 so we can test mods aswell glad its all working now others can follow If mine or others posts and info are helpful please give thanks/rep
|
|||
18-11-2015, 23:23 PM,
Post: #15
|
|||
|
|||
Carprog a1 adapter
My a9 cost me 2.99 for the 25pin dsub very simple to make I thought I'd ran out or resistors then I found these.
|
|||
18-11-2015, 23:32 PM,
Post: #16
|
|||
|
|||
RE: Carprog a1 adapter
(18-11-2015, 23:23 PM)tremo1984 Wrote: My a9 cost me 2.99 for the 25pin dsub very simple to make I thought I'd ran out or resistors then I found these.did you get one with the cover ? that's all i need now is the dsub got all the resistors still awaiting upgrade kit tho If mine or others posts and info are helpful please give thanks/rep
|
|||
19-11-2015, 01:06 AM,
Post: #17
|
|||
|
|||
RE: Carprog a1 adapter
Yer I did bud I used a bit of heat shrink on the resistor legs as well only took 5 mins, I only needed one cap for the a1, if you have same board as me will you test it be for and after mods for comparison, I didn't test mine before hand but has always been glitchy.
|
|||
19-11-2015, 09:06 AM,
Post: #18
|
|||
|
|||
RE: Carprog a1 adapter
(19-11-2015, 01:06 AM)tremo1984 Wrote: Yer I did bud I used a bit of heat shrink on the resistor legs as well only took 5 mins, I only needed one cap for the a1, if you have same board as me will you test it be for and after mods for comparison, I didn't test mine before hand but has always been glitchy.yeah m8 no problems I,ll build A9 asap and I,ll test both and see if there are any differences between I,ll see what board I have later aswell as I haven't even opened it up yet If mine or others posts and info are helpful please give thanks/rep
|
|||
19-11-2015, 10:59 AM,
Post: #19
|
|||
|
|||
RE: Carprog a1 adapter
Don't think you get any diferences in tests with a9 adapter before and after mods
I'm sure I tested mine soon as I bought it, I made the a9, tested, then did all mods after finding they needed doing. Then tested again Not done anything else with it since if my post helps please give Reputation and Thanks
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content