[ka_rai]

hi friends

customer replace FRM3R from E90 with FRM from china E90 so VIN is not ok
i repair FRM after crash battery so now FRM have not good coding

i must update FRM and mod VIN from FRM 

i install ncsexpert but i have this error running ncsexpert and not understand why 
i install bmw standtool2.12 and update daten 60.1

check screen from error runing ncsexpert or inpa





thanks fro your help

[jaramillo]

Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

[Fx82]

Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

[ka_rai]

Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

how i can know correct prog ?
with programmer no way have dlfash to eeprom because VIN not match with car

---

Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

how know good flash using winkfp ?

problem is ncsexpert always warning message ; seem not working fine

[vld]

Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

how i can know correct prog ?
with programmer no way have dlfash to eeprom because VIN not match with car

---

Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

how know good flash using winkfp ?

problem is ncsexpert always warning message ; seem not working fine

You have wrong configuration of BMW standard tools, fix that to have good communication and then flash with WinKFP.

[Fx82]

If you have icom and I can do it remote for you.
Mine system doesn't support d-can cable.

[ka_rai]

is ok i write FA from cas to frm, now all working fine but VIN not according with car( always old vin in frm)

but seem my spdaten to old because i not found frm3R PL2 according sw 9224601 in my list from winkft

[armenh7]

The second picture you posted is okay. The simplest way to get the proper zusb is use ISTA-P to calculate it.
You need to update the VIN using tool32.