Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
need update & mod VIN from FRM ?
04-03-2024, 17:06 PM,
Post: #1
|
|||
|
|||
need update & mod VIN from FRM ?
hi friends
customer replace FRM3R from E90 with FRM from china E90 so VIN is not ok i repair FRM after crash battery so now FRM have not good coding i must update FRM and mod VIN from FRM i install ncsexpert but i have this error running ncsexpert and not understand why i install bmw standtool2.12 and update daten 60.1 check screen from error runing ncsexpert or inpa thanks fro your help |
|||
04-03-2024, 18:24 PM,
(This post was last modified: 04-03-2024, 18:25 PM by jaramillo.)
Post: #2
|
|||
|
|||
RE: need update & mod VIN from FRM ?
Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom
|
|||
04-03-2024, 23:55 PM,
Post: #3
|
|||
|
|||
RE: need update & mod VIN from FRM ?
Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
05-03-2024, 07:03 AM,
(This post was last modified: 05-03-2024, 07:05 AM by ka_rai.)
Post: #4
|
|||
|
|||
RE: need update & mod VIN from FRM ?
(04-03-2024, 18:24 PM)jaramillo Wrote: Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom how i can know correct prog ? with programmer no way have dlfash to eeprom because VIN not match with car (04-03-2024, 23:55 PM)Fx82 Wrote: Just flash with winkfp and code with ncsexpert. how know good flash using winkfp ? problem is ncsexpert always warning message ; seem not working fine |
|||
05-03-2024, 07:15 AM,
Post: #5
|
|||
|
|||
RE: need update & mod VIN from FRM ?
(05-03-2024, 07:03 AM)ka_rai Wrote:(04-03-2024, 18:24 PM)jaramillo Wrote: Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom You have wrong configuration of BMW standard tools, fix that to have good communication and then flash with WinKFP. |
|||
05-03-2024, 09:12 AM,
Post: #6
|
|||
|
|||
RE: need update & mod VIN from FRM ?
If you have icom and I can do it remote for you.
Mine system doesn't support d-can cable. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
05-03-2024, 09:13 AM,
Post: #7
|
|||
|
|||
RE: need update & mod VIN from FRM ?
is ok i write FA from cas to frm, now all working fine but VIN not according with car( always old vin in frm)
but seem my spdaten to old because i not found frm3R PL2 according sw 9224601 in my list from winkft |
|||
25-03-2024, 01:06 AM,
Post: #8
|
|||
|
|||
RE: need update & mod VIN from FRM ?
The second picture you posted is okay. The simplest way to get the proper zusb is use ISTA-P to calculate it.
You need to update the VIN using tool32. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content