[dil6222]

Man if you cannot understand what everibody has explained to you, just leave-it like that.
You wil do more damage than good.
Hc05 it is not an easy task.

i have no problem with soldering desoldering with hotair
I know what all the pins on the chip are pin 9 etc I just need to know where pin 9 is on upa prog and any others that need connecting I have hc05 diagram from upa manual so I no what pins need connecting to which numbers but not where they are on upa boards.

if you can answer some questions it would be appriecieted.

1. do I have to remove chip from immo board and solder on upa adapter or can it stay in place and just attach wires ?

I see 2 places I can wire
1-9 by hotwire direct to pins on 1 adapter
or possibly solder to another adapter j1
I can upload photos so you can confirm