Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
UPA HC05 motorola immo chip connection
31-07-2015, 07:09 AM,
Post: #11
|
|||
|
|||
RE: UPA HC05 motorola immo chip connection
(31-07-2015, 05:47 AM)darek_naprawa Wrote: Upa reads HC05 in the system, you do not have to unsolder. so disconnect chip at pin9 vdd from immo board then solder wire on the pin9 of the chip and connect to pin 9 on upa? update I get it solder all 9 wires to chip and attach to 9 pins on upa as shown in upa manual leaving chip in place but disconnect vdd pin from circuit board so its only attached to upa wire 9 is this right ? or do I attach to 9pin immo connector pins straight to upa ? like below ? thankyou for helping darek If mine or others posts and info are helpful please give thanks/rep
|
|||
02-08-2015, 08:34 AM,
Post: #12
|
|||
|
|||
RE: UPA HC05 motorola immo chip connection
Hello
right I soldered all 9 wires for hc05b6 as shown in upa manual and lifted vdd pin from plate. tried to read but will not read. so I ran voltage tests 2 pins came back as bad if I remove the 2 bad wires and rerun test they both come back as ok. the first bad connection is pin 1 IRQ the second bad connection is pin 6 PD3 is was gonna give up but I found some extra reference to these chips hidden away in upa folder the 2 bad connections seem to be the same that are described in the files I found. 1 was a txt file just containing a few words : CUT PD3, IRQ, TCAP1 as 2 of these seem to be the same as my 2 bad connections. check screens below. its got me wondering maybe these chips will read ive seen someone else about with same errors on similar chip. any help info is appreciated. If mine or others posts and info are helpful please give thanks/rep
|
|||
02-08-2015, 19:05 PM,
Post: #13
|
|||
|
|||
RE: UPA HC05 motorola immo chip connection
Bad connected. Do this as a pdf. Read with power supply and repin jumper, everything is written in pdf format.
|
|||
02-08-2015, 22:29 PM,
Post: #14
|
|||
|
|||
RE: UPA HC05 motorola immo chip connection
(02-08-2015, 19:05 PM)darek_naprawa Wrote: Bad connected. Do this as a pdf. Read with power supply and repin jumper, everything is written in pdf format.ive solved it m8 got full read with upa I,m gonna make a full guide with screenshots to help others that are stuck I didn,t need to lift vdd in the end If mine or others posts and info are helpful please give thanks/rep
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW EDC17CP02 IMMO OFF OR Virginize | NickMayer | 4 | 33 |
1 hour ago Last Post: NickMayer |
|
KIA MEDG17.9.8 immo off issues | koziol | 2 | 39 |
7 hours ago Last Post: BmwMerc |
|
bmw e60 525d edc16c1 Immo Off | aboelgood | 1 | 17 |
7 hours ago Last Post: BmwMerc |
|
immo off edc16c39 | rachido_miss | 1 | 16 |
Yesterday, 18:59 PM Last Post: al70 |
|
KIA/HUNDAY DCM3.7ap need immo off in flas | Davidik | 2 | 44 |
Yesterday, 12:40 PM Last Post: Davidik |
|
valeo V42 Immo off | kuki88 | 3 | 118 |
Yesterday, 12:39 PM Last Post: kuki88 |
|
Piaggio Porter Bosch M7.8.0 M78 Immo Off | Kayhan 17# | 1 | 58 |
Yesterday, 11:10 AM Last Post: Kayhan 17# |
|
I NEED PSA MD1CS003 IMMO OFF | tokatli64 | 4 | 107 |
26-04-2024, 22:51 PM Last Post: Le-Mans |
|
immo toyota yaris 89661-0d276 | michelespl | 1 | 41 |
26-04-2024, 11:24 AM Last Post: Black Alien |
|
Piaggio Porter 1.3 - Bosch M.7.8.0 F01R00DQ24 IMMO OFF | blerim shehi | 3 | 78 |
26-04-2024, 10:25 AM Last Post: ROD-BENDERS |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content