+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59)
+---- Thread: HQ ор-сом 2014 (/showthread.php?tid=5203)
RE: HQ ор-сом 2014 - mpautoservis - 09-07-2014
Friends.
Does anyone have the english version 31223c with firmear 1.59, that may have worked with Chinese older clone, with a regular chip.
It remains to be tested.
Regards
RE: HQ ор-сом 2014 - mattydr67 - 09-07-2014
Do you wanna say орсом 131223c that works with any clone?
Not softwares for HQ clones maybe you try yo find?
Maybe as the vauxcom120309a that was shared here.
???????
Good luck
RE: HQ ор-сом 2014 - obdstart - 09-07-2014
(09-07-2014, 11:40 AM)mpautoservis Wrote: Friends.
Does anyone have the english version 31223c with firmear 1.59, that may have worked with Chinese older clone, with a regular chip.
It remains to be tested.
Regards
My advice: dont try because you f..k chinese interface, especially with a fake chip... so choice is yours..
RE: HQ ор-сом 2014 - al 150 cdti - 09-07-2014
Vaux-com 120309a modified I have If that's any help
RE: HQ ор-сом 2014 - mattydr67 - 09-07-2014
I belive he needs орсом 131223c made like the vauxcom that you have
This softwares works with any no moded clones
As Mr obdstar said the softwares for HQ clones not working with nomoded clones and you can damage item too
Good luck
RE: HQ ор-сом 2014 - obdstart - 09-07-2014
(09-07-2014, 20:28 PM)al 150 cdti Wrote: Vaux-com 120309a modified I have If that's any helpAlready uploaded here:
http://garage-automotive.com/showthread.php?tid=4429
RE: HQ ор-сом 2014 - ruffles1986 - 09-07-2014
Where i can buy a HQ clone?? (Not usually china clon 2010)
RE: HQ ор-сом 2014 - McMihai - 09-07-2014
(09-07-2014, 04:29 AM)mattydr67 Wrote: @McMihai - may you tell us what Astra G you tested please
I wanna do some tests in same car and I will review here
Good luck
is Astra G 2004 CDTI, 59Kw,Z17DTL
RE: HQ ор-сом 2014 - mattydr67 - 10-07-2014
@McMihai
This car I tested allready few mounths ago without problem using ор-сом 131223c english version.
Tool has fw1.60 ( I didn't need to downgrade it to fw1.59 ). But with VAUX-COM I had issues to connect to one of the controlers. ( i don;t remember now in which one but i will be able to find one car like that one again too ) In the rest i had no problem in any car that I tested.
recentlly ( or usually ) my tests cars are: Corsa C, Vectra B, Omega B, Astra G, Insignia and from time to time Vectra C
I had not problem anymore in not one of this cars using VAUX-COM 131223d and firmware 1.60
@ruffles1986 - mate you can find in this forum in Market Place or to the resselers from you country (maybe) - in other forums in Selling Place too or using google
Good luck
RE: HQ ор-сом 2014 - McMihai - 10-07-2014
of Mattydr67 for @McMihai
Try like this and report please
Downgrade your firmware in your HQ clone to the fw 139 using OCflash
Then install орсом 121231h or орсом121231i ( english version )
Then plug the tool to the USB and try to connect to a car ( the tool not connected to a car )
The software will upgrade the firmware in yiur interface to the fw 1.47 or 1.59 ( I don't know now but I can check later to be sure ) and then try in that Astra G.
You'll see that it will works like a charm.
@titon - when you mean old you mean the date - 2007 (on mine it is write 2014 ) or you're talking about Revision B hardware ( because $I mentioned above there's no other harware sold by chinese )
JFI - the орсом hardwares are made in china but moding and softwares or this solution it wasn't sold in china anymore.
Good luck
[/quote]
with a little help from a great person.
I followed your advice done as you said and used the version 121231h with FW1.47
in the same car (astra G) WORKS PERFECTLY
I appreciate all the information provided by Mr. Mattydr67