+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Soft trunk closing BMW G21 (/showthread.php?tid=100098)
Soft trunk closing BMW G21 - Dravil - 05-12-2024
Hello folks,
I have a BMW G21 with automatic tailgate/trunk.
It hits like a hammer when I close it.
Is it possible to code soft closing with ё5у5 for this model?
If so, do you know the sequence of numbers? It worked with F11.
ё5у5 is availible
RE: Soft trunk closing BMW G21 - Stratofortress - 05-12-2024
Assuming the vehicle is with Comfort Access, Check HKFM module (or the respective for tailgate functions) and search for APPL_PLG_SPEED_PROFILE
Parameters listed below to change contain the byte values for tailgate closing power at different positions in movement. Reduce to slow down. Change values of the following parameters:
ProfileCloseStopNode1PwmPlg
ProfileCloseStopNode2PwmPlg
The following hex values in ascending order for slam power are provided:
000A, 00A0, 00BE, 00C8, 00FA, 017C, 0212, 0226
RE: Soft trunk closing BMW G21 - Dravil - 06-12-2024
Thank u for your reply. i will test it and will give feedback.
RE: Soft trunk closing BMW G21 - Dravil - 10-12-2024
I checked the values at HKFM2 and found only two parameters
ProfileCloseStopNode1PwmPlg
01,B8 (see picture)
Should i change them to your recomindation?
(05-12-2024, 23:18 PM)Stratofortress Wrote: Assuming the vehicle is with Comfort Access, Check HKFM module (or the respective for tailgate functions) and search for APPL_PLG_SPEED_PROFILE
Parameters listed below to change contain the byte values for tailgate closing power at different positions in movement. Reduce to slow down. Change values of the following parameters:
ProfileCloseStopNode1PwmPlg
ProfileCloseStopNode2PwmPlg
The following hex values in ascending order for slam power are provided:
000A, 00A0, 00BE, 00C8, 00FA, 017C, 0212, 0226
RE: Soft trunk closing BMW G21 - Stratofortress - 10-12-2024
Simply set both Pwm Ausgelesen values to wert_0.
RE: Soft trunk closing BMW G21 - Dravil - 16-12-2024
Set both to Wert=0 but the trunk lid does not close there is a gap. Probably need to try other values. Or do you have something suitable?
(10-12-2024, 20:37 PM)Stratofortress Wrote: Simply set both Pwm Ausgelesen values to wert_0.