[Dravil]

Hello folks,
I have a BMW G21 with automatic tailgate/trunk.
It hits like a hammer when I close it.
Is it possible to code soft closing with ё5у5 for this model?
If so, do you know the sequence of numbers?  It worked with F11.
ё5у5 is availible

[Stratofortress]

Assuming the vehicle is with Comfort Access, Check HKFM module (or the respective for tailgate functions) and search for APPL_PLG_SPEED_PROFILE

Parameters listed below to change contain the byte values for tailgate closing power at different positions in movement. Reduce to slow down. Change values of the following parameters:

ProfileCloseStopNode1PwmPlg
ProfileCloseStopNode2PwmPlg

The following hex values in ascending order for slam power are provided:
000A, 00A0, 00BE, 00C8, 00FA, 017C, 0212, 0226

[Dravil]

Thank u for your reply. i will test it and will give feedback.

[Dravil]

I checked the values at HKFM2 and found only two parameters

ProfileCloseStopNode1PwmPlg
01,B8 (see picture)

Should i change them to your recomindation?

Assuming the vehicle is with Comfort Access, Check HKFM module (or the respective for tailgate functions) and search for APPL_PLG_SPEED_PROFILE

Parameters listed below to change contain the byte values for tailgate closing power at different positions in movement. Reduce to slow down. Change values of the following parameters:

ProfileCloseStopNode1PwmPlg
ProfileCloseStopNode2PwmPlg

The following hex values in ascending order for slam power are provided:
000A, 00A0, 00BE, 00C8, 00FA, 017C, 0212, 0226

[Stratofortress]

Simply set both Pwm Ausgelesen values to wert_0.

[Dravil]

Set both to Wert=0 but the trunk lid does not close there is a gap. Probably need to try other values. Or do you have something suitable?

Simply set both Pwm Ausgelesen values to wert_0.