![]() |
|
e90 Kombi programming status 2 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: e90 Kombi programming status 2 (/showthread.php?tid=112700) |
e90 Kombi programming status 2 - tintoverano - 20-11-2025 hi, arrived a Kombi with a programming error and I'm not able to do anything with it in WINKFP or else is it bricked? pls see the details attached thanks! RE: e90 Kombi programming status 2 - DieStream - 20-11-2025 What flashing software did you use and which ZUSB port did you select? RE: e90 Kombi programming status 2 - tintoverano - 20-11-2025 WINKFP was used I tried the current ZUSB and two lower versions with different program files in ёxpёят mode what do you mean by "port"? RE: e90 Kombi programming status 2 - SkeYT - 20-11-2025 In such situations, I flash the software directly to the MCU using JTAG. After 10 minutes, everything comes back to life. RE: e90 Kombi programming status 2 - tintoverano - 20-11-2025 (20-11-2025, 16:22 PM)SkeYT Wrote: In such situations, I flash the software directly to the MCU using JTAG. After 10 minutes, everything comes back to life. sounds good, never tried that I'll look into what's required thanks! RE: e90 Kombi programming status 2 - DieStream - 21-11-2025 (20-11-2025, 16:13 PM)tintoverano Wrote: WINKFP was used Sorry i mean which ZUSB рдятnumber. RE: e90 Kombi programming status 2 - PUMUKY1 - 23-11-2025 1: Use Tool32 aif_schreiben FG97197;250925;9316169 2: Winkfp Comfort mode RE: e90 Kombi programming status 2 - tintoverano - 24-11-2025 (23-11-2025, 21:49 PM)PUMUKY1 Wrote: 1: Use Tool32 I'll try tool32 thanks! |