F11 register new battery with INPA? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: F11 register new battery with INPA? (/showthread.php?tid=11460) |
F11 register new battery with INPA? - Bimmer540 - 20-11-2015 Is it possible to register new battery from F11 with INPA. Or maybe with e-sys (and how to do it) RE: F11 register new battery with INPA? - hojo29 - 20-11-2015 The same battery was installed again? RE: F11 register new battery with INPA? - Bimmer540 - 20-11-2015 (20-11-2015, 19:30 PM)hojo29 Wrote: The same battery was installed again? Yes. RE: F11 register new battery with INPA? - hojo29 - 20-11-2015 Then readjust battery with Rheingold and Register RE: F11 register new battery with INPA? - ruben_17non - 21-11-2015 (20-11-2015, 19:43 PM)hojo29 Wrote: Then readjust battery with Rheingold and Register +1 the best and easy way is with Rheingold. also is possible with Tool32 and Inpa. RE: F11 register new battery with INPA? - CATAHA - 21-11-2015 (20-11-2015, 19:17 PM)snypertje Wrote: Is it possible to register new battery from F11 with INPA. BMW F10 Battery Registration with Rheingold Procedure to register new battery using INPA: Step 1: select BODY from the left hand pop-up menu Step 2: select POWER MODULE in the right hand list Step 3: select ACTIVATE from the next menu Step 4: Select ACTIVATE2 from the next menu Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly." 1. Open Tool32 2. Datei > SGBD, Gruppendatei Laded > Select MSD80.PRG > Click Open 3. Highlight steuern_batterietausch_registri 4. Job > Job Einmal Ausfuhren (run job once) 5. The job runs pretty quickly and the results say Job_status = okay. (May alternatively be under MSV70 or MSV80.prg or YOUR_ENGINE.prg) RE: F11 register new battery with INPA? - Bimmer540 - 21-11-2015 Thanks for the info!!! |