[Bimmer540]

Is it possible to register new battery from F11 with INPA.

Or maybe with e-sys (and how to do it)

[hojo29]

The same battery was installed again?

[Bimmer540]

The same battery was installed again?

Yes.

[hojo29]

Then readjust battery with Rheingold and Register

[ruben_17non]

Then readjust battery with Rheingold and Register

+1
the best and easy way is with Rheingold.
also is possible with Tool32 and Inpa.

[CATAHA]

Is it possible to register new battery from F11 with INPA.

Or maybe with e-sys (and how to do it)

BMW F10 Battery Registration with Rheingold



Procedure to register new battery using INPA:

Step 1: select BODY from the left hand pop-up menu
Step 2: select POWER MODULE in the right hand list
Step 3: select ACTIVATE from the next menu
Step 4: Select ACTIVATE2 from the next menu
Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly."


1. Open Tool32
2. Datei > SGBD, Gruppendatei Laded > Select MSD80.PRG > Click Open
3. Highlight steuern_batterietausch_registri
4. Job > Job Einmal Ausfuhren (run job once)
5. The job runs pretty quickly and the results say Job_status = okay.
(May alternatively be under MSV70 or MSV80.prg or YOUR_ENGINE.prg)

[Bimmer540]

Thanks for the info!!!