+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F30 B48 - MG1CS003 - Work Hour Reset (/showthread.php?tid=119426)
F30 B48 - MG1CS003 - Work Hour Reset - Semi14 - 29-05-2026
Hi,
I need to reset the working hours
BWW F30
MG1CS003
Greatings
RE: F30 B48 - MG1CS003 - Work Hour Reset - atomantmk - 29-05-2026
Read working hours with i5тд, Tool32 and post.
Read working hours with i5тд, Tool32 and post.
RE: F30 B48 - MG1CS003 - Work Hour Reset - Semi14 - 01-06-2026
Unfortunately, BMW Explorer does not support this SWFL. It's strange because in tool32 and BMW Explorer it shows different values even after conversion
RE: F30 B48 - MG1CS003 - Work Hour Reset - DSESET86 - 01-06-2026
(29-05-2026, 08:10 AM)Semi14 Wrote: Hi,
I need to reset the working hours
BWW F30
MG1CS003
Greatings
RE: F30 B48 - MG1CS003 - Work Hour Reset - Semi14 - 01-06-2026
(01-06-2026, 15:06 PM)DSESET86 Wrote:(29-05-2026, 08:10 AM)Semi14 Wrote: Hi,
I need to reset the working hours
BWW F30
MG1CS003
Greatings
I'll write tomorrow if it works. Thank you
RE: F30 B48 - MG1CS003 - Work Hour Reset - Semi14 - 05-06-2026
Unfortunately, your solution didn't work. I did it a bit differently.
Explorer didn't support the SWFL that DME had. So I used Р5dZDата 18.03 and ё5у5 3.30. I downgraded the software to SWFL, which supports BMW Explorer.
RE: F30 B48 - MG1CS003 - Work Hour Reset - CichyTuned - 24-08-2026
(05-06-2026, 18:47 PM)Semi14 Wrote: Unfortunately, your solution didn't work. I did it a bit differently.
Explorer didn't support the SWFL that DME had. So I used Р5dZDата 18.03 and ё5у5 3.30. I downgraded the software to SWFL, which supports BMW Explorer.
If you still need it, I can change the VIN and reset the operating hours to zero.
RE: F30 B48 - MG1CS003 - Work Hour Reset - tcp443 - 25-08-2026
(24-08-2026, 17:15 PM)CichyTuned Wrote:(05-06-2026, 18:47 PM)Semi14 Wrote: Unfortunately, your solution didn't work. I did it a bit differently.
Explorer didn't support the SWFL that DME had. So I used Р5dZDата 18.03 and ё5у5 3.30. I downgraded the software to SWFL, which supports BMW Explorer.
If you still need it, I can change the VIN and reset the operating hours to zero.
Good day,
Do you think you can help me reset the working hours on this dme please?
It is a F30 B48 MG1CS0003 DME file.
Thank you.
| B48DME.zip | ||
| File Type: |
|
 |
| Downloaded: | 6 times | |
| Size: | 90.06 KB | |