+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)? (/showthread.php?tid=122861)
G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)? - XuLeTZ - 14-09-2026
Hi guys,
Is it possible to re-map the dummy / buffered analog temperature gauge on the G30 cluster (KOMBI) so that it shows a true operational range, for example between 95°C and 110°C?
G30 540i 2018
Currently, the needle sits right in the middle as soon as coolant/oil reach around 70°C–75°C. I'd prefer the middle position to reflect actual operating temp (around 100°C) rather than staying centered across such a wide dead zone.
Has anyone found the specific coding parameters in KOMBI to adjust the temperature scaling/thresholds for the gauge?
Thanks!
RE: G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)? - uh60 - 14-09-2026
There is no such tool for the G series.