Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)?
|
14-09-2026, 12:36 PM,
(This post was last modified: 14-09-2026, 12:37 PM by XuLeTZ.)
Post: #1
|
|||
|
|||
G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)?
Hi guys,
Is it possible to re-map the dummy / buffered analog temperature gauge on the G30 cluster (KOMBI) so that it shows a true operational range, for example between 95°C and 110°C? G30 540i 2018 Currently, the needle sits right in the middle as soon as coolant/oil reach around 70°C–75°C. I'd prefer the middle position to reflect actual operating temp (around 100°C) rather than staying centered across such a wide dead zone. Has anyone found the specific coding parameters in KOMBI to adjust the temperature scaling/thresholds for the gauge? Thanks! ![[їшяgё: OxNUyuy.jpg]](https://i.imgur.com/OxNUyuy.jpg) |
|||
|
|
14-09-2026, 13:42 PM,
Post: #2
|
|||
|
|||
|
RE: G30 cluster analog gauge mapping – how to change temperature range (e.g. 95°C–110°C)?
There is no such tool for the G series.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
