Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT (/showthread.php?tid=12817) |
Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - brunocortona - 19-01-2016 Dear friends, unfortunely i am not able to set up K+DCAN clone cable with INPA EDIABAS and NCS EXPERT. Trust me..i tried everything but it was not possible... So now i would like to make coding on NCSEXPERT with a genuine ICOM. Do you have/know a guide to set up ICOM with EDIABAS? Thank you friends RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - hamzettin - 19-01-2016 Hello , use itoolradar http://cartechnology.co.uk/showthread.php?tid=6256&highlight=itoolradar RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - 0176.abraham - 19-01-2016 Use itool radar with easy connect and copy the ip from icom from itool radar in easy conect. Than in easy connect setting: Remote ip copy obd_625 icom lock check now u can use icom with ncs inpa..... RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - brunocortona - 19-01-2016 Ok but will icom still genuine working with ista D/P? how can check icom lock? thank you RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - Sabreace - 19-01-2016 (19-01-2016, 20:59 PM)brunocortona Wrote: Ok but will icom still genuine working with ista D/P? Icom genuine work for ista D/P Icom lock or unlock you see in Itool Radar RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - brunocortona - 20-01-2016 Will it work with DCAN protocol? i need it to coding R60. I read about ediabas.ini configure REMOTE:MOST (To use MOST) REMOTE: DiagBus (To use DiagBus) Which i need to setup? RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - ruben_17non - 20-01-2016 (20-01-2016, 12:56 PM)brunocortona Wrote: Will it work with DCAN protocol? i need it to coding R60. obd_625 RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - brunocortona - 20-01-2016 In easy connect i have not old_625. i can find OBD_ab625 it is this that you mean? RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - bernd79 - 20-01-2016 Where can i find easy connect? RE: Configure genuine ICOM to work with EDIABAS INPA NCSEXPERT - Sabreace - 20-01-2016 (20-01-2016, 16:16 PM)brunocortona Wrote: In easy connect i have not old_625. Yes that's the right one I think you have (m)any Problems http://cartechnology.co.uk/showthread.php?tid=12789 (20-01-2016, 18:11 PM)bernd79 Wrote: Where can i find easy connect? http://cartechnology.co.uk/showthread.php?tid=6167&highlight=easyconnect |