[brunocortona]

Dear friends,

i am trying to connect my car (mini r60) to inpa / ncsexpert but i am having these problems:

2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiResultText 1
Fehler in EDIABAS oder in SG-Beschreibungsdatei IFH-0003: Datenuebertragung HOST/Interface gestoert CAS

2000 Error COAPI2.CPP coapiRunCabd 6
Fehler in EDIABAS oder in SG-Beschreibungsdatei FGNR_LESEN

2000 Error COAPI.CPP coapiReadFgNr 12
Fehler in EDIABAS oder in SG-Beschreibungsdatei FGNR_LESEN: A_E65CAS


Do you have an idea to solve the problem?

Tools used:
EDIABAS.INI configured with COM9 and latency 1(I have to try set it on COM1 tomorrow)
NCSEXPER with expert profile
SPDATEN v2.54 correctly installed with BMW coding tool

I read someone solve the problem removing pin 8 from interface.

What do you thing?



Please help me it is very important

thank you for your time

[mplinux]

You will go C:/ncsexpert/work dossier and check it FSW_PSW.TRC file you can open notepad this file and erase all in and save it. after you will try.

[brunocortona]

Ok i will try tomorrow.

Any other advice?

[ruben_17non]

First check conexion with inpa black Dots.
if conexion is ok, remplace daten by V57

[brunocortona]

Ok thank you
inpa dots were both black. but i will set the COM PORT on 1 because i read it in INPA official document.

So i will try to update data.

another question about cable, i have a new chinese/clone K+DCAN
, it is not a problem the pin 8? I read that on 2008+ cars it is suggested to remove pin 8....

[ruben_17non]

Ok thank you
inpa dots were both black. but i will set the COM PORT on 1 because i read it in INPA official document.

So i will try to update data.

another question about cable, i have a new chinese/clone K+DCAN
, it is not a problem the pin 8? I read that on 2008+ cars it is suggested to remove pin 8....

if you have 2 dots in inpa, conexion is ok, no problem with pin

[brunocortona]

OK thank you ruben i just find SP DATEN V3.57.2.002

This evening i will try them.

However if connection is ok i am worried about errors caused by COAPI2.CPP COAPI2.CPP.

I hope update DATEN fix them too.

thank you again and i will hope the post

[pweber84]

What car and year do you have?

[brunocortona]

Mini countryman R60 2012

---

mini countryman R60 2012

[brunocortona]

I have the same errors with daten updated to v3.57

---

inpa results

"ifh-0009 no response from control unit"

i removed the 8 pin but same result


maybe cheap cable quality