+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: DiagBox 8.01 Installation (/showthread.php?tid=13539)
RE: DiagBox 8.01 Installation - ykntr - 28-02-2018
I got error after installed
RE: DiagBox 8.01 Installation - lord_bethor - 30-03-2018
Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create "C:\AWRoot\dtwr\cfg\Config.sys").
2- Install "VC++ 2008 Redistributable Package", a copy will be available in "C:\teleassistance\visualC\vcredist_x86.exe" after installing DiagBox.
3- Restart the computer and use “Kill_DiagBox_Tasks.bat” to stop related processes and rename "C:\AWRoot" to "C:\AWRoot7"
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will copy configuration from "C:\AWRoot7\.." and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.
Done !,
Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review "Versions" below.
If DiagBox runs fine, ensure you keep a backup copy of the file “C:\AWRoot\bin\fi\APPDIAG.SYS” in a safe location.
Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).
Versions
DiagBox will run and display the (8.xx or 7.xx) version number listed in “AWRoot\bin\fi\version.ini” file. However, Lexia or PP2000 will fail to operate with "version.ini" set to “08.xx” and "APPDIAG.SYS" will be corrupted and will need to be restored before DiagBox will work again.
So, for DiagBox, Lexia and PP2000 to operate, set the version to “7.xx” or “7.xxx” (07.81 or 07.817 can be set to indicate the true DiagBox 8 version).
[APPLICATION]
version=07.817
It is possible to operate Lexia/PP2000 (after starting DiagBox with 8.xx) by starting DiagBox while having "version.ini" listing the 8.xx only (or first), then changing it to 7.xx or commenting the line "version=08.xx" and saving BEFORE starting LEXIA or PP2000 as shown below.
[APPLICATION]
;version=08.01
version=07.65
Hi... I have an issue after the point 6. Everything goes ok until I restart Diagbox after the installation of 8.01 - the software shows error number 1. How can I fix it?
RE: DiagBox 8.01 Installation - Attila65 - 09-06-2018
Welcome to the members! Unfortunately I do not know the diagbox software, but it is in my interest. I want to know which version of the diagbox works on windows 10 64 bit system. Can someone help me? Thanks.
RE: DiagBox 8.01 Installation - minabdo - 10-06-2018
I am looking for a manual or training for both of LEXIA PP 2000 and diagbox
Please help me I need it a lot
RE: DiagBox 8.01 Installation - zabala - 15-06-2018
(09-06-2018, 21:39 PM)Attila65 Wrote: Welcome to the members! Unfortunately I do not know the diagbox software, but it is in my interest. I want to know which version of the diagbox works on windows 10 64 bit system. Can someone help me? Thanks.
It works fine with windows 10 but only 32 bit.
RE: DiagBox 8.01 Installation - zabala - 15-06-2018
After update from 7.65 to 8.17 diagbox is only working when I start the programm with administrator. With user it has a licence problem. Anyone has a solution?
RE: DiagBox 8.01 Installation - Timon2210 - 26-06-2018
Hello,
I have tried the method to update my DiagBox (V7.83) to (V8.35) using the (APP) method in the first post,everything went well,but when I restarted the computer and started the Diagbox,it's still showing (V7.83) on the top right corner,is that what suppose to happen,or something is wrong?
Thank you so much for your help.
RE: DiagBox 8.01 Installation - Simple - 26-06-2018
Initially, I left the version indicating DiagBox as is, I then changed this in later updates to reflect Lexia and PP2000. So, if you install later updates the version will change.
RE: DiagBox 8.01 Installation - Timon2210 - 27-06-2018
(26-06-2018, 23:12 PM)Simple Wrote: Initially, I left the version indicating DiagBox as is, I then changed this in later updates to reflect Lexia and PP2000. So, if you install later updates the version will change.
Thank you so much for your reply,Well when I check the correct version (C:\AWRoot\bin\fi\version.ini),it shows that the version is (7.83),so is that what supposed to show,as you said that this file shows the exact version we have installed.
**UPDATE**:I downloaded the updates (8.35-8.38),(8.38-8.42),and (8.42-8.46),I installed them,in the first 2 updates the version didn't change,but when I installed the last one,it shows now (7.846),so I guess I screwed things up instead of making better..LOL.
Hope you can help me,noting that I didn't restart the computer after the first 2 update or between the first 2 updates,does that make a diff.?
Thank you.
RE: DiagBox 8.01 Installation - Simple - 27-06-2018
No, you are fine with respect to the version#. I changed the versioning method so that the user knows that he is using version 7 with version 8 updates and which update is installed.
This way you would know that you have update 8.46. You can go up to 7.855 (as far as I remember).
You should restart after every update.