Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO-CHIPS

  5. Ecu-Service



DiagBox 8.01 Installation
22-02-2016, 22:02 PM, (This post was last modified: 07-09-2018, 06:25 AM by Simple.)
Post: #1
DiagBox 8.01 Installation
Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01 and related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Notice
- Links for all required software, updates and tools are in the attachments.
- If using a Virtual Machine, ensure Virtualization is enabled in the physical laptop BIOS.

Preparation for Installing DiagBox 8.01 on Notebooks and VMWare Workstation
- Starting with any (32 bit) Windows (preferably XP or 7), install .NET 3.51 and Windows drivers or VMWare Tools (if on VMWare Workstation or Player).

Preparation for Installing DiagBox 8.01 on VirtualBox
- Settings --> System: Motherboard, ensure APIC is OFF, use one processor and enable Virtualization. Allocate enough memory for VM.
- Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51, use the Powershell Command "Get-WMIObject win32_BIOS" or the "DMIdecode" tool to obtain BIOS information (not essential).
- Close VirtualBox and start an administrator's CMD, navigate to "C:\Program Files\Oracle\VirtualBox\" and execute the following command (Replacing "Your VM" with your Virtual Machine's name, and System Serial with your hardware's or any code or text such as "CDN29326BH"):
C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System Serial"

Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create "C:\AWRoot\dtwr\cfg\Config.sys").
2- Install "VC++ 2008 Redistributable Package", a copy will be available in "C:\teleassistance\visualC\vcredist_x86.exe" after installing DiagBox.
3- Restart the computer and use “Kill_DiagBox_Tasks.bat” to stop related processes and rename "C:\AWRoot" to "C:\AWRoot7"
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will copy configuration from "C:\AWRoot7\.." and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.

Done !,

Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review "Versions" below.

If DiagBox runs fine, ensure you keep a backup copy of the file “C:\AWRoot\bin\fi\APPDIAG.SYS” in a safe location.

Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).

Versions
DiagBox will run and display the (8.xx or 7.xx) version number listed in “AWRoot\bin\fi\version.ini” file. However, Lexia or PP2000 will fail to operate with "version.ini" set to “08.xx” and "APPDIAG.SYS" will be corrupted and will need to be restored before DiagBox will work again.
So, for DiagBox, Lexia and PP2000 to operate, set the version to “7.xx” or “7.xxx” (07.81 or 07.817 can be set to indicate the true DiagBox 8 version).
[APPLICATION]
version=07.817

It is possible to operate Lexia/PP2000 (after starting DiagBox with 8.xx) by starting DiagBox while having "version.ini" listing the 8.xx only (or first), then changing it to 7.xx or commenting the line "version=08.xx" and saving BEFORE starting LEXIA or PP2000 as shown below.
[APPLICATION]
;version=08.01
version=07.65

Updates
- DiagBox v7 and v8 install and run on all x86 (32bit) Windows including 10 TH1, TH2, RS1, RS2, RS3 and RS4.
- Entering a System Serial for the Virtual Machine (as described above) resolves the "psaAagent.exe" and the missing tabs issue on VirtualBox.
- If you get "Error 2" after restarting DiagBox, try commenting "version=8.xx" in "version.ini" before restarting DiagBox again.

To use Lexia and PP2000 8.35 and later updates with DiagBox 7.83
Installing APP 8.35 on DiagBox 7.83

To change DiagBox language interface
Changing DiagBox, Lexia and PP2000 Language

P.S. DiagBox has been running on Firmware v4.3.4 since DiagBox v7.66/8.02 and Firmware v4.3.5 since DiagBox v8.45.

Someone put the full installation process on the net, just edit "version.ini" as described above.

DiagBox 8.01 installation and updates video

Enjoy; Simple.


Attached Files
DBox_8xx_Install_and_update.txt
File Type: .txt
Downloaded: 2,498 times
Size: 1.25 KB

Kill_DiagBox_Tasks.zip
File Type: .zip
Downloaded: 2,118 times
Size: 301 bytes

Reputation: +69 - fusername [+1] , VehiculoCOMONuevo [+1] , docarri [+1] , Floryn_P [+1] , Geri [+1] , daro_mayday [+1] , carmansk [+1] , Balyanchic [+1] , Michael1 [+1] , crebain [+1] , McMihai [+1] , hbalazs [+1] , GoldRush [+1] , autoservice [+1] , florinolo [+1] , cat14 [+1] , FrancisNYC [+1] , ljscodex [+1] , Joe2 [+1] , mdanilo [+1] , fantomel [+1] , kingauto [+1] , marianro2007 [+1] , zmann [+1] , purplek85 [+1] , roanoke [+1] , delta9 [+1] , daniel guerra [+1] , obdstart [+1] , zsola400 [+1] , carpi [+1] , kmaverick [+1] , t1tan1 [+1] , Le-Mans [+1] , jtanner [+1] , jmchimi [+1] , obdflasher [+1] , kregiel [+1] , Rafiusk [+1] , shouldube [+1] , wcysj08 [+1] , johnny4759 [+1] , wald [+1] , pankar [+1] , tenaglia [+1] , corfumadness [+1] , roninxxx [+1] , andy_sim1 [+1] , jakuza [+1] , Дмитрий_rus25 [+1] , maxtra [+1] , rightpcb [+1] , pagadi5 [+1] , lackypl [+1] , NoFear [+1] , bruno efraim [+1] , kamilwlkp [+1] , Mavox [+1] , bmitsis [+1] , sotos [+1] , LUCAS45 [+1] , AIR0 [+1] , jhonny [+1] , tinchocbr [+1] , Aldi [+1] , Lemmi [+1] , farukeroglu [+1] , jurid [+1] , vankidjuca [+1]
Quote this message in a reply
[+] 188 users say Thank You to Simple for this post
22-02-2016, 22:07 PM,
Post: #2
RE: DiagBox 8.01 Installation
(22-02-2016, 22:02 PM)Simple Wrote:  Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

1- Install DiagBox 7.01, perform the Activation, this will create the “APPDIAG.SYS”, “CFG.BIN” and “VERSION.INI” files in "C:\AWRoot\bin\fi\" needed for V8.01 installation. Stop the installation (Task Manager, End Task) and reboot the computer.
2- Rename "C:\AWRoot" to "C:\AWRoot7" and uninstall DiagBox v7.01, this will NOT remove “C:\AWRoot7”. Install Microsoft .NET 3.5 SP1, VC++ 2008 and Java and restart the computer.
3- Install 8.01, it will create a new "C:\APP" and "C:\AWRoot" but when requesting User Activation, close it and restart the computer.
4- Run "AWRoot_v7_files_for_v8.exe" (attached to the first post) and restart DiagBox application, it will continue the DiagBox 8.01 installation.
5- When finished, close DiagBox and restart it to ensure it is working fine and no updates are needed, it will report the Version 7.65.

Installing Updates:
1- Download and install "DiagBox_updt_802.ISO" update. (Links in the DiagBox 8.xx Upgrade thread)
2- Other updates are as explained previously.

Notice:
The order of installing things is important. Java 7.67 and VC++ 2008 9.0.21022.8, together with the necessary files are included in the attachement.

i don"tunderstand nothing from here...where is attachement?any setup?...any link?
Quote this message in a reply
[+] 3 users say Thank You to teamtuner for this post
22-02-2016, 22:18 PM,
Post: #3
RE: DiagBox 8.01 Installation
The process (1 to 5) is already there in your quote as well as the "VC2k8_Java767_DBox-Files.txt" attachment..
Refresh the browser!! and state what is not clear to make it clearer..
Quote this message in a reply
[+] 1 user says Thank You to Simple for this post
22-02-2016, 22:32 PM,
Post: #4
RE: DiagBox 8.01 Installation
3- Install 8.01, it will create a new "C:\APP" and "C:\AWRoot" but when requesting User Activation, close it and restart the computer.


where to find iso 8.01?
Quote this message in a reply
[+] 1 user says Thank You to teamtuner for this post
22-02-2016, 22:40 PM,
Post: #5
RE: DiagBox 8.01 Installation
It is here:
http://cartechnology.co.uk/showthread.php?tid=13354
I also added it in the attachment of the first post.
Quote this message in a reply
01-03-2016, 09:14 AM,
Post: #6
RE: DiagBox 8.01 Installation
The process (in the first post) has been updated and shortened. Also, DiagBox updates together with a new tool were added to the attachment.
Quote this message in a reply
[+] 3 users say Thank You to Simple for this post
02-03-2016, 09:32 AM,
Post: #7
RE: DiagBox 8.01 Installation
(22-02-2016, 22:02 PM)Simple Wrote:  Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Notice
- This process is updated as I get new ideas or feed back to improve it.
- Links for DiagBox 8.01, DiagBox updates and "AWRoot_v7_Conf+Ativation_v8.exe" are in the attachment.
- Starting with an installed Windows XP Pro SP3 X86 (32 bit), nothing else is needed (but I had .NET 3.5 SP1, FireFox and 7Zip installed).

Installing DiagBox 8.01
1- Install DiagBox 7.01 and run update 7.02 then install update 7.xx-7.57 (or any v7.45+ update that creates "C:\AWRoot\dtwr\cfg\Config.sys")
2- Restart the computer and rename "C:\AWRoot" to "C:\AWRoot7" (you may need to stop some diagBox processes)
3- Run DiagBox 8.01 installation until it requests Activation. Close it and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will inject the necessary files and copy the configuration from "C:\AWRoot7".
4- Run DiagBox, it should continue the installation successfully.

Done !, restart DiagBox 8.01 (as Administrator) to confirm all has gone well.

Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent updates or Maitresox updates.

Update 1
The order of the version lines and which is active in VERSION.INI is important for the running of the system. DiagBox will display 08.01 if set as shown below. But Lexia will NOT work with "version.ini" set to V08.xx active (xx is the version number depending on which update is applied).
[APPLICATION]
version=08.01
version=07.65

If Lexia is started with "version=08.xx" active, "APPDIAG.SYS" will be corrupted and it will need to be restored before DiagBox will work again. To operate Lexia (after starting DiagBox with 8.xx), edit "version.ini" and comment/save "version=08.xx" (by inserting ";" as shown below) BEFORE starting LEXIA.

Setting "version.ini" to 07.xx (by removing or commenting "version=8.xx" permanently) will prompt DiagBox to report V 07.xx, but everything will work fine..
[APPLICATION]
;version=08.08
version=07.72

Update 2
- There is an issue with installing DiagBox 8 on VirtualBox, but it installs well on VMWare Workstation and Player.
- DiagBox v7 and v8 do NOT install on Windows 10 RS1 (may be sorted in future Windows 10 RS1 releases), but they install on Windows 10 TH1 and TH2.

Enjoy;

Simple.


Hi Simple
installation is functioning well 1000000000%
great job
Thank you very much
you are the big big big big big big B O S S !!!!!!!!!!!!!!!!!!!!!
Quote this message in a reply
[+] 5 users say Thank You to carmansk for this post
10-03-2016, 18:26 PM,
Post: #8
RE: DiagBox 8.01 Installation
New additions to the 1st post:
1- Installjng DiagBox 8.01 on VirtualBox.
2- Information on VC++ 2008 need and location (4th point in the Notice section)..
Simple.
Reputation: +1 - zmann [+1]
Quote this message in a reply
[+] 3 users say Thank You to Simple for this post
13-03-2016, 06:29 AM,
Post: #9
RE: DiagBox 8.01 Installation
Updated the first post with lurchy666's "Error 2" findings, refer to his post here: http://cartechnology.co.uk/showthread.ph...#pid145443
Quote this message in a reply
[+] 1 user says Thank You to Simple for this post
20-10-2016, 11:44 AM,
Post: #10
RE: DiagBox 8.01 Installation
Hi, link for AWRoot_v7_Conf+Ativation_v8.exe is dead

I helped you, dont forgot  press Rep+thanks   biggrin
or if you want, i accept donations at
[Image: 196566.png]
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
PCitroen Diagbox 7.83 software lotr 25 10,084 17-10-2019, 14:51 PM
Last Post: quest
PPeugeot Finally, Diagbox V9 activation succeeded. wxhank 5 1,265 15-10-2019, 21:34 PM
Last Post: Itsme
  Diagbox and cars newer than 2014 krikesa 5 677 15-10-2019, 11:42 AM
Last Post: obd2 peugeot
PPeugeot Diagbox 9.47 Genuine - can update to 9.54 online gooroo 2 699 08-10-2019, 06:20 AM
Last Post: gunnarbjork
PCitroen Diagbox PSA Server by-pass estebanfree 41 26,230 07-10-2019, 15:09 PM
Last Post: Swdiag73
  Diagbox 7.83 Virtual Machine minhqp 2 348 30-09-2019, 05:50 AM
Last Post: gpv
  DiagBox 9.40 Oficial Rik 22 7,259 27-09-2019, 15:17 PM
Last Post: justdiag
PPeugeot Diagbox Online - Tokens and Diagnostic Keys lucaslacerda 9 1,249 24-09-2019, 04:08 AM
Last Post: wxhank
  DiagBox 8.xx Upgrade & How to Update Simple 83 58,137 24-09-2019, 00:26 AM
Last Post: Atrax
PPeugeot [How-To] Diagbox 7.57 telecoding Server fix Itsme 20 6,817 23-09-2019, 08:34 AM
Last Post: Itsme

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content