DiagBox 8.01 Installation - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DiagBox 8.01 Installation (/showthread.php?tid=13539) |
RE: DiagBox 8.01 Installation - Simple - 01-03-2017 OK, you must have a working DiagBox 7.45+, and you seem to have one. Now, you must stop all DiagBox processes to be able to rename C:\AWRoot to C:\AWRoot7. Once the above is done, you can start DiagBox 8.01 installation process. After the message that you get (in your snapshot), press the X button and close the application, then run AWRoot_v7_Conf+Ativation_v8.exe to copy the configuration files from "C:\AWRoot7" NOT any other name, no spaces no hyphens, just AWRoot7 and in C:\. RE: DiagBox 8.01 Installation - mikroel - 01-03-2017 (01-03-2017, 20:02 PM)Simple Wrote: OK, you must have a working DiagBox 7.45+, and you seem to have one.i did all as you described but nothing new happend but i solved problem on this way: I have changed version.config file in folder bin/fi and put ;version=8.01 i didn't see that in video instruction! now diabox is activated and start updating RE: DiagBox 8.01 Installation - mikroel - 01-03-2017 Just one more question regarding diagbox 8.38: Is it normal that after finished installation updates 817-837 and 835-838 to see in right upper corner V08.17 or i am doing something wrong? RE: DiagBox 8.01 Installation - kmaverick - 09-03-2017 Hi, I have updates 7.83 to 8.01 all fine Then i updated 8.01 to 8.02 as admin and ran the kill file before installing When i open diagbox it opens as 8.02 but i get this error message C:\APP\ddc\bin\DDCAPP~1EXE The NTVDM CPU has encountered an illegal instruction I am using windows xp in VMware 12 , I have .net and C++ installed Many thanks RE: DiagBox 8.01 Installation - Simple - 09-03-2017 You are probably running Windows XP SP2!! If so, did you try installing SP3? There was an issue similar to this and related to the Windows XP "Security Center". Try disabling it from "Services" and see if it stops the error. If it does, update to SP3 (attached). RE: DiagBox 8.01 Installation - kmaverick - 09-03-2017 (09-03-2017, 10:11 AM)Simple Wrote: You are probably running Windows XP SP2!! If so, did you try installing SP3? Thanks for the quick reply. I am on Sp3 and disabled all in security center. I have also ran a 'cclean'. but the error is still there , just doing the other updates up to 8.42 will see if that resolves it, then will try it on a car. Many thanks RE: DiagBox 8.01 Installation - Simple - 09-03-2017 (09-03-2017, 10:50 AM)kmaverick Wrote: Thanks for the quick reply. I am on Sp3 and disabled all in security center. I have also ran a 'cclean'. but the error is still there , just doing the other updates up to 8.42 will see if that resolves it, then will try it on a car. Then run SFC /SCANNOW (as Admin), also check for Viruses/Malware.. RE: DiagBox 8.01 Installation - tortu25 - 10-03-2017 Hello thanks for the installation tuto diagbox 8.01 it is well spent remains more than to do the updates and try on car thank you RE: DiagBox 8.01 Installation - gianfix - 28-03-2017 (22-02-2016, 22:02 PM)Simple Wrote: Installing DiagBox 8.01 hi friend, I followed your written guide, and also the video guide on youtube, but when I get to the point 5, Run Diagbox again, It Should continue the installation successfully, appears an error error during installation of lexia. In your opinion, where am I wrong? I await someone to help me kindly. I have installed diagbox to windows 7 32 bit Thank you RE: DiagBox 8.01 Installation - Simple - 28-03-2017 Check if there is corruption in Windows or the files! Run: C:\WINDOWS\system32>chkdsk /b /f /v /scan c: and C:\WINDOWS\system32>SFC /SCANNOW |