+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA 3.55.11 (/showthread.php?tid=15431)
RE: ISTA 3.55.11 - tste1982 - 05-05-2016
(05-05-2016, 12:33 PM)AutoExe3219 Wrote:(05-05-2016, 12:28 PM)tste1982 Wrote: Does anybody have the installer files for the launcher?http://cartechnology.co.uk/showthread.php?tid=15359
thanks, but i meant the database files for the launcher. and the new firmware files, like i've seen in a post.
is programming now included?
RE: ISTA 3.55.11 - ruben_17non - 05-05-2016
(05-05-2016, 13:20 PM)tste1982 Wrote:(05-05-2016, 12:33 PM)AutoExe3219 Wrote:(05-05-2016, 12:28 PM)tste1982 Wrote: Does anybody have the installer files for the launcher?http://cartechnology.co.uk/showthread.php?tid=15359
thanks, but i meant the database files for the launcher. and the new firmware files, like i've seen in a post.
is programming now included?
Programming work, same as previous version, included by oficial method i think no.
maybe in 3.60
or 4.01 check>
(03-05-2016, 00:29 AM)Grease Monkey Wrote:(02-05-2016, 20:03 PM)ruben_17non Wrote: Great!!
important changes in V55?
Thanks
Update of vehicle master data.
The vehicle master data system has been standardised across BMW. Therefore the vehicle master data has been adapted in ISTA. When identifying a vehicle using basic feature selection, the "national-market version" field has been omitted and the "basic version“ has been introduced instead. The basic versions available are ECE and US. Select "US" in the case of vehicles for the US market, for all others select "ECE".
End of support for ISID R1 and IMIB R1.
From ISTA 3.55 on, ISID R1 and IMIB R1 will no longer be supported. The installation of ISTA on an ISID R1 will be disabled. It will also no longer be possible to connect ISTA with an ISID R1.
New minimum system requirements from ISTA 4.01 on.
From ISTA 4.01 on (rollout planned in August 2016), due to the introduction of the programming functionality in ISTA, the minimum system requirements will be adapted as follows:
• Processor with at least 2 cores and 2.2 GHz
• At least 4 gigabyte RAM
• At least 500 gigabyte hard disk
• Alternatively: ISIDR2
New ICOM Next firmware 03-14-08.
A new ICOM Next firmware with version number 03-14-08 will be delivered with ISTA 3.55.
There are also improvements in the execution of the vehicle test in old series.
Displaying and reopening old Service Cases.
Due to the update of the vehicle master data it is not possible to reopen or resume Service Cases created with ISTA 3.54 or lower.
ICOM Next: Vehicle test not possible for DME in old series.
A vehicle test of the DME is not possible in old series. DME must be deselected for a vehicle test in old series. Please use the ICOM as a workaround.
RE: ISTA 3.55.11 - tste1982 - 05-05-2016
(05-05-2016, 13:43 PM)ruben_17non Wrote:(05-05-2016, 13:20 PM)tste1982 Wrote:(05-05-2016, 12:33 PM)AutoExe3219 Wrote:(05-05-2016, 12:28 PM)tste1982 Wrote: Does anybody have the installer files for the launcher?http://cartechnology.co.uk/showthread.php?tid=15359
thanks, but i meant the database files for the launcher. and the new firmware files, like i've seen in a post.
is programming now included?
Programming work, same as previous version, included by oficial method i think no.
maybe in 3.60
Thats why i was asking.
RE: ISTA 3.55.11 - ruben_17non - 05-05-2016
(05-05-2016, 13:45 PM)tste1982 Wrote:(05-05-2016, 13:43 PM)ruben_17non Wrote:(05-05-2016, 13:20 PM)tste1982 Wrote:(05-05-2016, 12:33 PM)AutoExe3219 Wrote:(05-05-2016, 12:28 PM)tste1982 Wrote: Does anybody have the installer files for the launcher?http://cartechnology.co.uk/showthread.php?tid=15359
thanks, but i meant the database files for the launcher. and the new firmware files, like i've seen in a post.
is programming now included?
Programming work, same as previous version, included by oficial method i think no.
maybe in 3.60
Thats why i was asking.
aaaa ok, i understand.
but is possible ista launcher ready for programming data, but maybe 3.55 not is enable officially. i not know. maybe aknight can explain this.
in log of ista, show this line programming data version is empty, with launcher maybe add new line in reg for this.
this in log>
2016-05-05 14:11:15 INFO [T] ISTA: [1] Logic.Logic() - ******* FASTA-SystemVersion: 3.55.11.16402 Launcher-ProductVersion: 3.55.11.16402
2016-05-05 14:11:15 INFO [T] ISTA: [1] Logic.Logic() - ******* FASTA-GlobalDataVersion: 3.54.13 Launcher-DataVersion: 3.54.13
2016-05-05 14:11:15 INFO [T] ISTA: [1] Logic.Logic() - ******* FASTA-ProcessDataVersion: R3.55 Launcher-MainProductVersion: 3.55
2016-05-05 14:11:15 INFO [T] ISTA: [1] Logic.Logic() - ******* FASTA-FlashDataVersion Launcher-SWIData:
2016-05-05 14:11:15 INFO [T] ISTA: [1] Logic.Logic() - ******* FASTA-LanguageDataVersion: 3.53.13 Launcher-DataVersion_es-ES:
This is empty in log, but programming work fine, maybe when you add DATA for programm with launcher, add line in reg for add this info.
FlashDataVersion
Launcher-SWIData:
PreloadProgrammingCore: "False"
RE: ISTA 3.55.11 - bernd79 - 06-05-2016
If i unpack the Rar file there comes a error message
G:\BMW ISTA VANAF 3 55\BMW_ISTA_VANAF_3.55.11.rar: Prüfsummenfehler der Datei BMW_ISTA_VANAF_3.55.15-WERKEND\SQLiteDBs\streamdataprimitive_OTHER.sqlite. The file is damaged
RE: ISTA 3.55.11 - Node - 06-05-2016
Works without any problems for me. So it must be something with your download or your computer (have you used WinRAR to unpack?).
RE: ISTA 3.55.11 - Fonser - 06-05-2016
Wasn't it a 7zip file?
RE: ISTA 3.55.11 - Node - 06-05-2016
I'm sure this time it was rar, but I never had any problems extracting 7z with WinRAR either.
RE: ISTA 3.55.11 - AutoExe3219 - 06-05-2016
(06-05-2016, 16:57 PM)bernd79 Wrote: If i unpack the Rar file there comes a error messageWorks without any problems for me. use winrar or 7zip to unpack is ok.So it must be something with your download.
G:\BMW ISTA VANAF 3 55\BMW_ISTA_VANAF_3.55.11.rar: Prüfsummenfehler der Datei BMW_ISTA_VANAF_3.55.15-WERKEND\SQLiteDBs\streamdataprimitive_OTHER.sqlite. The file is damaged
RE: ISTA 3.55.11 - gyl0981 - 07-05-2016
(06-05-2016, 23:03 PM)AutoExe3219 Wrote:(06-05-2016, 16:57 PM)bernd79 Wrote: If i unpack the Rar file there comes a error messageWorks without any problems for me. use winrar or 7zip to unpack is ok.So it must be something with your download.
G:\BMW ISTA VANAF 3 55\BMW_ISTA_VANAF_3.55.11.rar: Prüfsummenfehler der Datei BMW_ISTA_VANAF_3.55.15-WERKEND\SQLiteDBs\streamdataprimitive_OTHER.sqlite. The file is damaged
if need fixer?