+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Add cruise control berlingo b9 2013 (/showthread.php?tid=18106)
Pages:
1
2
Add cruise control berlingo b9 2013 - mirek1234 - 09-09-2016
Hellou
problem add cruise control engine ecu citroen berlingo b9 2013
manual config ecu
cruise control enable
coding requiest connect internet and connect server psa
please help.
thanks
RE: Add cruise control berlingo b9 2013 - mirek1234 - 11-09-2016
Berlingo b9 print screen:
RE: Add cruise control berlingo b9 2013 - Simple - 11-09-2016
You could try disconnecting the OBDII and hitting enter then reconnect and continue (some people reported this is the way to overcome this issue) or use DiagBox v7.62 for manual telecoding..
RE: Add cruise control berlingo b9 2013 - mirek1234 - 11-09-2016
Diagbox 7.62 testing
diagbox 7.62 write incorrect code
RE: Add cruise control berlingo b9 2013 - Simple - 11-09-2016
Use this link to find out about the corrections made in the various releases for your car:
http://service.citroen.com/dtt/IFD/AC/documents/en_GB/
Click on DiagBox version 7.62 first, then move up one version at a time. Check under "Vehicle affected" if your car is listed and what correction relates to your issue, under "DiagBox symptom corrected".
You will know which DiagBox release is needed to perform the correction on your car.
RE: Add cruise control berlingo b9 2013 - mirek1234 - 11-09-2016
(11-09-2016, 14:23 PM)Simple Wrote: Use this link to find out about the corrections made in the various releases for your car:
http://service.citroen.com/dtt/IFD/AC/documents/en_GB/
Click on DiagBox version 7.62 first, then move up one version at a time. Check under "Vehicle affected" if your car is listed and what correction relates to your issue, under "DiagBox symptom corrected".
You will know which DiagBox release is needed to perform the correction on your car.
I do not understand.
I want to activate the cruise control in the drive engine. diagbox requiest connect internet server psa. Search Solutions as a bypass internet connect. Thanks
RE: Add cruise control berlingo b9 2013 - Simple - 11-09-2016
Some people reported that when DiagBox requests an internet connection to perform Telecoding, disconnect the OBDII and hit enter (to get red of the message), then plug the OBDII back and continue Telecoding. I cannot remember in which post it was reported!.
My other comment about the version was to find out which update fixed the error you receive in v7.62.
RE: Add cruise control berlingo b9 2013 - mirek1234 - 11-09-2016
Diagbox 7.83 reconnect unsuccessful
installing diagbox 7.62. I'll try tomorrow disconnect the OBDII and hit enter (to get red of the message), then plug the OBDII back and continue Telecoding.
thanks
RE: Add cruise control berlingo b9 2013 - mirek1234 - 11-09-2016
Diagbox 7.62 :
manual config engine ecu - cruise control: enabled
disconnect obd
enter
connect obd
30s apc off
apc on
diagbox write: configuration failed
RE: Add cruise control berlingo b9 2013 - Simple - 11-09-2016
You don't need to do that with DiagBox v7.62, it does not request internet connection..
However, there are too many bugs concerning the Berlingo, it is probably best to stick with 7.83 (8.19).
Search for how to bypass the request for internet connection. Also, review this post, it may be of help (I cannot verify if it works):
http://cartechnology.co.uk/showthread.php?tid=14116