Pug 407 dash - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Pug 407 dash (/showthread.php?tid=18553) |
Pug 407 dash - genius76 - 29-09-2016 Hi Ned help 407 2.0 hdi 2006 using x-tool Remowed dash Reade mileage BSI obd done corect readed mealage x-tool 93c66 shows wrong milage even on swap bits puted on carprog read corect mealage, on write error weritifi and new epprom only fffff 000000 car starts but dash going crize dig. display just laights and blinking nothing shows neadle for water on max read again carprog error version not recognise xprog reads ffff00000 only ori dash itis first reading with xprog ghg reading thas hapens after all can help any body? Thanks RE: Pug 407 dash - km666 - 29-09-2016 Dump is the wrong!Desoldered eeprom 93C66? RE: Pug 407 dash - genius76 - 29-09-2016 Thanks for answer Yeas mate desolder shoisen 8 bits readed any chances to repair now? RE: Pug 407 dash - km666 - 29-09-2016 Write new dump with 16 bits.only use 16 bits. RE: Pug 407 dash - genius76 - 29-09-2016 New dump ? that i dont have new dump RE: Pug 407 dash - km666 - 29-09-2016 You have serial in dash.Need dump with this serial. RE: Pug 407 dash - genius76 - 29-09-2016 U mean A2C53187279 Thanks That works now!!! ok now what shows km but not ml how to switch it? RE: Pug 407 dash - genius76 - 29-09-2016 Dump works fine but in km on dash display somebody hawe dump with ml RE: Pug 407 dash - genius76 - 29-09-2016 Here is serial any help Thanks |