Diagbox 7.83 software - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: Diagbox 7.83 software (/showthread.php?tid=21601) |
Diagbox 7.83 software - lotr - 06-02-2017 Hello! This is the software that I got when I bought the hardware, hope it will be useful for someone. RE: Diagbox 7.83 software - kmaverick - 07-02-2017 (06-02-2017, 18:00 PM)lotr Wrote: Hello! This is the software that I got when I bought the hardware, hope it will be useful for someone. Hi, Does this need activating ? Thanks RE: Diagbox 7.83 software - Simple - 07-02-2017 It will work fine.. Install DiagBox 7.01 then restart DiagBox it will update to 7.02. Then update 7.xx-7.57 -> 7.57-7.58 -> 7.68-7.62 -> 7.62-7.66 -> 7.66-7.74 -> 7.74-7.76 -> 7.76-7.82 -> 7.82-7.83. Good luck, Simple. RE: Diagbox 7.83 software - kmaverick - 08-02-2017 (07-02-2017, 11:54 AM)Simple Wrote: It will work fine.. Cheers, all installed and 7.83 working fine. (On Windows XP in a VM, if this helps any one.) RE: Diagbox 7.83 software - Simple - 08-02-2017 Well done, is your VM VirtualBox or Workstation? Ensure you have .NET 3.51 and VC++ 2008 and operate DiagBox as Administrator. If you are using VirtualBox then close VirtualBox and start an Administrator's CMD, navigate to "C:\Program Files\Oracle\VirtualBox\" and execute the following command: C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System Serial" Note: Replace "Your VM" with your Virtual Machine's name, and "System Serial" with your hardware's # or any code or text such as "CDN29326BH" or "DIAGBOX7". RE: Diagbox 7.83 software - kmaverick - 10-02-2017 (08-02-2017, 13:55 PM)Simple Wrote: Well done, is your VM VirtualBox or Workstation? Hi, Yes, I had installed .net and C++ allready. I am using VMware workstation version 12, I have also tried it on Vmware player ver 12. I have genuine diagbox working with a cardaq and actia. Will this verison work with these? I am using a diagbox cable with the software currently. Many thanks RE: Diagbox 7.83 software - teerak2uk - 14-02-2017 Does this only work on win 32bit? RE: Diagbox 7.83 software - Simple - 15-02-2017 DiagBox will install on both 32 bit and 64 bit systems. However, the Lexia and PP2000 components embedded within DiagBox are 32 bit only applications and will fail to run on 64 bit systems. RE: Diagbox 7.83 software - teerak2uk - 15-02-2017 So best option is a vm if running on a 64bit machine RE: Diagbox 7.83 software - kerekt - 15-02-2017 Is Telecoding work on this version ? |