Smok UHDS Support/Feedback/Backup Thread - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Smok UHDS Support/Feedback/Backup Thread (/showthread.php?tid=21970) |
RE: Smok UHDS Support/Feedback/Backup Thread - M83 - 27-01-2019 (23-01-2019, 15:02 PM)volavka Wrote: Audi S Q5 2015 no tool does, only direct eeprom 95320, from 2014 onwards, it has problem. upload file and I do it RE: Smok UHDS Support/Feedback/Backup Thread - ltujustas - 08-02-2019 Hi. I need to recalibrate mileage in XC70 1m80f, If I block synch with smok, old mileage will not jump back after ignition turn on ? I read that is enough for 1000-5000 km drive. And that is exactly what I need. Or am I wrong, and I still need calibrate mileage in door module ? RE: Smok UHDS Support/Feedback/Backup Thread - David89 - 10-03-2019 Trying someone to set the mileage in Ducato 2014 by obd? RE: Smok UHDS Support/Feedback/Backup Thread - David89 - 26-03-2019 Does anyone have any experience with ECU Marelli MJ9DF by SMOK UHDS OBD? Read and write any maps for tuning? greetings RE: Smok UHDS Support/Feedback/Backup Thread - north456 - 06-04-2019 hi @volavka wich one you prefer smok or x-tool ?you have thems regards RE: Smok UHDS Support/Feedback/Backup Thread - M83 - 06-04-2019 (26-03-2019, 19:04 PM)David89 Wrote: Does anyone have any experience with ECU Marelli MJ9DF by SMOK UHDS OBD? It works fine, but smok does not correct checksum. (Correct checksum before writing) RE: Smok UHDS Support/Feedback/Backup Thread - ltujustas - 11-04-2019 Hello. Maybe someone can explain how to recalibrate mileage in dash audi a6 4G by obd ? Smoke writes that a6/7/8 and touareg can calibrate by obd. I have calibrated by obd A8 2013 there was colourful dash, but A6 2012 with white/black screen smoke can't to do, allways shows after RSA calc error. Only way to do, I need desolder EE and prepare EE for these white/black screens dash ? RE: Smok UHDS Support/Feedback/Backup Thread - doditnt - 12-04-2019 hello i have w176 dp4. i can't write km on dash. with or without can filter. i have tried with only 1 can filter on dash or without. this error on smok: Sesion Start 2:05:02 PM Write Km Dash W176 New Km= 77777 Licence Accepted New Km: 77777 Writing KM W245/W246... Init Ok 1729028205 1729025805 1729028305 2469022603 1729026105 1729028405 Sec Access 1 Request Sec Access 1 Ok Sec Access 2 Request Sec Access 2 Ok Sec Access 3 Request Sec Access 3 Ok Unlocking... Memory Unlocked Error !!! Writing ... Complete Write EEprom Ok Sesion Finished 2:05:28 PM please help RE: Smok UHDS Support/Feedback/Backup Thread - David89 - 21-04-2019 (06-04-2019, 17:55 PM)M83 Wrote:(26-03-2019, 19:04 PM)David89 Wrote: Does anyone have any experience with ECU Marelli MJ9DF by SMOK UHDS OBD? OK. Thanks for your info. How will I be able to correct the checksums before writing? What tool? RE: Smok UHDS Support/Feedback/Backup Thread - kwork - 19-06-2019 Does anyone knows how to connect to 2013 Audi A7 dashboard with separate cable for SMOK? Please tell me connect for which cable to which place. I want to edit km for this car. Address 17: Instruments Control Module Part Number: 4G8 920 932 F If anyone have a photo,please share to me. Best Regards |