+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Nissan Quashqai 2.0d eprom corrupt no start (/showthread.php?tid=23056)
Pages:
1
2
Nissan Quashqai 2.0d eprom corrupt no start - dieselfuel - 29-03-2017
Hello all!
i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU
i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult
i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612
ECU is Bosch EDC16C33
bosch are 0281013 855
RE: Nissan Quashqai 2.0d eprom corrupt no start - 9azerty - 29-03-2017
(29-03-2017, 15:46 PM)dieselfuel Wrote: Hello all!
i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU
i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult
i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612
ECU is Bosch EDC16C33
bosch are 0281013 855
hello
I have same problem
not with reprog only coding injector and key card
car not start
car is renault koleos 2.0l dci same your car
my I search virgin dump
I work with can clip
defaut injecteur code
defaut code pin not valide
ecu blocked
sorry for my english
RE: Nissan Quashqai 2.0d eprom corrupt no start - dieselfuel - 29-03-2017
Hope you solve your problem........
my misstake not to BDM file from start
RE: Nissan Quashqai 2.0d eprom corrupt no start - mike_service - 29-03-2017
Hi
You can recode injectors value when P1612 are stored in ecu !
Set new virgin eep and recode ecu like new one !
Regards
Mike
RE: Nissan Quashqai 2.0d eprom corrupt no start - dieselfuel - 30-03-2017
The ECU will not accept the injectors codes that originaly were stored in the ECU before i started the procedure.....
i tried both with Consult III and with Bosch ESI
any one has virgin eeprom for this ECU?
RE: Nissan Quashqai 2.0d eprom corrupt no start - 9azerty - 30-03-2017
(29-03-2017, 21:28 PM)dieselfuel Wrote: Hope you solve your problem........
my misstake not to BDM file from start
not solve my problem
BDM is after car not start
I need virgin eeprom but not find
RE: Nissan Quashqai 2.0d eprom corrupt no start - ROD-BENDERS - 30-03-2017
(29-03-2017, 15:46 PM)dieselfuel Wrote: Hello all!
i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU
i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult
i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612
ECU is Bosch EDC16C33
bosch are 0281013 855
Diesel
here virgin
RE: Nissan Quashqai 2.0d eprom corrupt no start - dieselfuel - 31-03-2017
OK, thanks!
i did wright back the eeprom..
now to match the immu-ECU
when reading the pin code from the BCM by Nissan ConsultIII i get these numbers: D 5 6 3 8
then i try the C/U intializing, it asks for a password??? tried typing this D 5 6 3 8 no joy..
seems the password is something else, is there a way to calculate the password?
thanks
RE: Nissan Quashqai 2.0d eprom corrupt no start - ROD-BENDERS - 31-03-2017
(31-03-2017, 11:23 AM)dieselfuel Wrote: OK, thanks!
i did wright back the eeprom..
now to match the immu-ECU
when reading the pin code from the BCM by Nissan ConsultIII i get these numbers: D 5 6 3 8
then i try the C/U intializing, it asks for a password??? tried typing this D 5 6 3 8 no joy..
seems the password is something else, is there a way to calculate the password?
thanks
maybe this will help
RE: Nissan Quashqai 2.0d eprom corrupt no start - dieselfuel - 31-03-2017
Many Many thanks m8
all worked out at the End
2577 is the pin code accepted,
Finaly car started