[dieselfuel]

Hello all!

i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU

i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult

i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612

ECU is Bosch EDC16C33
bosch are 0281013 855

[9azerty]

Hello all!

i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU

i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult

i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612

ECU is Bosch EDC16C33
bosch are 0281013 855

hello
I have same problem
not with reprog only coding injector and key card
car not start
car is renault koleos 2.0l dci same your car
my I search virgin dump
I work with can clip
defaut injecteur code
defaut code pin not valide
ecu blocked

sorry for my english

[dieselfuel]

Hope you solve your problem........
my misstake not to BDM file from start

[mike_service]

Hi
You can recode injectors value when P1612 are stored in ecu !
Set new virgin eep and recode ecu like new one !

Regards
Mike

[dieselfuel]

The ECU will not accept the injectors codes that originaly were stored in the ECU before i started the procedure.....

i tried both with Consult III and with Bosch ESI

any one has virgin eeprom for this ECU?

[9azerty]

Hope you solve your problem........
my misstake not to BDM file from start

not solve my problem
BDM is after car not start
I need virgin eeprom but not find

[ROD-BENDERS]

Hello all!

i have a 2007 Nissan quashqai 2.0 d
i removed the DPF using Kess V2, saved inj. codes
after flashing the ECU, the inj. codes wont be written back to ECU

i did try to manualy writing them back with Nissan Consult III
wont take them returns error, even i did read them originaly with Consult

i think something happened with eprom, car wont start get 2 errors
P0611 (inj. codes)
P1612

ECU is Bosch EDC16C33
bosch are 0281013 855

Diesel

here virgin

[dieselfuel]

OK, thanks!
i did wright back the eeprom..
now to match the immu-ECU
when reading the pin code from the BCM by Nissan ConsultIII i get these numbers: D 5 6 3 8
then i try the C/U intializing, it asks for a password??? tried typing this D 5 6 3 8 no joy..

seems the password is something else, is there a way to calculate the password?

thanks

[ROD-BENDERS]

OK, thanks!
i did wright back the eeprom..
now to match the immu-ECU
when reading the pin code from the BCM by Nissan ConsultIII i get these numbers: D 5 6 3 8
then i try the C/U intializing, it asks for a password??? tried typing this D 5 6 3 8 no joy..

seems the password is something else, is there a way to calculate the password?

thanks

maybe this will help

[dieselfuel]

Many Many thanks m8
all worked out at the End
2577 is the pin code accepted,

Finaly car started