+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)
RE: VCDS 17.8 MULTILANGUAGE FULL - darek_naprawa - 20-11-2017
(20-11-2017, 19:58 PM)uh60 Wrote:Thanks.(13-11-2017, 20:04 PM)darek_naprawa Wrote: Please tell me if this vag has hw44 or hw46.
This is HW46, works quite good, but the 7805 builds up a lot of heat. Better to find a 44 one but this one also works really well but you might have to change the 7805 quite a couple of times in its lifetime.
Hw 44 not 46, I've already checked.
RE: VCDS 17.8 MULTILANGUAGE FULL - onliest - 21-11-2017
Hello
My old vcds after the update lost CAN.
Now I have a new one but I do not know how to get it for updates. Someone will help?
RE: VCDS 17.8 MULTILANGUAGE FULL - zeze - 21-11-2017
(21-11-2017, 17:57 PM)onliest Wrote: Hello
My old vcds after the update lost CAN.
Now I have a new one but I do not know how to get it for updates. Someone will help?
have fake chip inside
not possible to update
RE: VCDS 17.8 MULTILANGUAGE FULL - marko99 - 22-11-2017
I have programmed vcds but I have K1-OK, K2-OK, CAN-not ready? My version of HW-46, USB \ VID_0403 & PID_FA24 & REV_0600. My MProg has no active button "Erase All Existing Deviaces",
and why it might be a problem !
RE: VCDS 17.8 MULTILANGUAGE FULL - gyenge - 23-11-2017
I write vagcom via usb and when press update for firmware 1.95 to 1.96 its failed ..
RE: VCDS 17.8 MULTILANGUAGE FULL - amaflo - 23-11-2017
(23-11-2017, 09:40 AM)gyenge Wrote: I write vagcom via usb and when press update for firmware 1.95 to 1.96 its failed ..
open the interface, program the processor atmega162 upa usb, AVR USBASP
RE: VCDS 17.8 MULTILANGUAGE FULL - morito - 23-11-2017
Hi
anybody can solution for stop date vcds??
runasdate not work for me
many thanks in the advance
regards
RE: VCDS 17.8 MULTILANGUAGE FULL - BWF - 24-11-2017
Jumpers J1 and J5 must be removed after programming?
VCDS 17.8 MULTILANGUAGE FULL - mikroel - 30-11-2017
Good work
![[Image: 612eb65d81e5620bf1e97507d23cd1ef.jpg]](https://uploads.tapatalk-cdn.com/20171130/612eb65d81e5620bf1e97507d23cd1ef.jpg)
Autoscan screen in attachment
RE: VCDS 17.8 MULTILANGUAGE FULL - SliderZ - 02-12-2017
Dear All,
i have to say thank you. With all the written support and manuals it was possible to flash my very old Dongle (Chinese clone 11.11.6) to the newest Version. Yesterday i used the programm and loader V2 for EPB in my Audi.
With regards.