VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509) |
RE: VCDS 17.8.1 MULTILANGUAGE FULL - mattdj - 26-06-2019 (20-06-2019, 14:28 PM)ganobi1 Wrote: [quote="mattdj" pid='450493' dateline='1558779533'] (09-06-2019, 09:01 AM)mattdj Wrote: Nobody can help me? For You or all. I have tried but it's show me Device ID: FF FF FF. Can you recommend a new interface for VCDS ? RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 27-06-2019 (16-06-2019, 13:38 PM)papito56 Wrote: Hi: Loder update New VCDS Loader v8.0 is here. It works with VCDS version 19.6.0 and some older. You need to reflash EEPROM. Also take a look at _README.pdf in the archive. tested with last french release (18.9.1 FRM) and works fine ! RE: VCDS 17.8.1 MULTILANGUAGE FULL - mattdj - 02-07-2019 (27-06-2019, 13:51 PM)ZIPPO4594 Wrote:(16-06-2019, 13:38 PM)papito56 Wrote: Hi: Loder update New VCDS Loader v8.0 is here. It works with VCDS version 19.6.0 and some older. You need to reflash EEPROM. Also take a look at _README.pdf in the archive. You have tried also 19.6.1? Because loaders show me failed 2 what is the last working version with the loader 8? RE: VCDS 17.8.1 MULTILANGUAGE FULL - fantomel - 02-07-2019 Best is to remain at 18.9.1, so give a click if you need. RE: VCDS 17.8.1 MULTILANGUAGE FULL - flashdash - 07-07-2019 I updated my vcds cable through usb I started vcds software and did the test it shows firmware 1.95 and said updated needed. I pressed update but after a while says unable to update. Anybody have any ideas as to why RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 09-07-2019 vcds version ? Loader version ? Last fimware is 1.96 (inclued into vcdsloader v8.0 by Kolimer) If the fw update don’t work via usb, you need to upgrade via external programmer (like USBasp...) RE: VCDS 17.8.1 MULTILANGUAGE FULL - ALE009 - 13-07-2019 Can someone send me a link of witch VCDS obd2 dongle to buy that works with this setup/software? Thanks! RE: VCDS 17.8.1 MULTILANGUAGE FULL - bento - 15-07-2019 do 19.6 supports Long coddings? which version supports? RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 22-07-2019 Hi all ! anyone are tested VCDS 19.6.1 FRM (french version) with VcdsLoader 8.0 ? thank you advance RE: VCDS 17.8.1 MULTILANGUAGE FULL - Marco89 - 30-07-2019 I installed the 19.6.1 with the loader 8; VCDS starts, but it says version 18.9.1, anyway as soon as you get into engine you get an error.. all in all I had to go back to 18.9.1, which works great. |