Possibly Related Threads…

***mattdj*** · (This post was last modified: 26-06-2019, 13:34 PM by Clusters.)

(20-06-2019, 14:28 PM)ganobi1 Wrote: [quote="mattdj" pid='450493' dateline='1558779533']
But whit Tl866II I can programm the interface with fuse bits locked?

(09-06-2019, 09:01 AM)mattdj Wrote: Nobody can help me?

For You or all.

I have tried but it's show me
Device ID: FF FF FF.
Can you recommend a new interface for VCDS ?

***ZIPPO4594*** · 27-06-2019, 13:51 PM,

(16-06-2019, 13:38 PM)papito56 Wrote: Hi: Loder update New VCDS Loader v8.0 is here. It works with VCDS version 19.6.0 and some older. You need to reflash EEPROM. Also take a look at _README.pdf in the archive.

REPUTATION+THENK

tested with last french release (18.9.1 FRM) and works fine !

***mattdj*** · (This post was last modified: 02-07-2019, 13:38 PM by mattdj.)

(27-06-2019, 13:51 PM)ZIPPO4594 Wrote:
(16-06-2019, 13:38 PM)papito56 Wrote: Hi: Loder update New VCDS Loader v8.0 is here. It works with VCDS version 19.6.0 and some older. You need to reflash EEPROM. Also take a look at _README.pdf in the archive.

REPUTATION+THENK

tested with last french release (18.9.1 FRM) and works fine !

You have tried also 19.6.1? Because loaders show me failed 2

what is the last working version with the loader 8?

***fantomel*** · (This post was last modified: 03-07-2019, 00:35 AM by Clusters.)

Best is to remain at 18.9.1, so give a click if you need.

***flashdash*** · 07-07-2019, 20:35 PM,

I updated my vcds cable through usb I started vcds software and did the test it shows firmware 1.95 and said updated needed. I pressed update but after a while says unable to update. Anybody have any ideas as to why

***ZIPPO4594*** · 09-07-2019, 16:56 PM,

vcds version ?
Loader version ?
Last fimware is 1.96 (inclued into vcdsloader v8.0 by Kolimer)
If the fw update don’t work via usb, you need to upgrade via external programmer (like USBasp...)

***ALE009*** · 13-07-2019, 21:41 PM,

Can someone send me a link of witch VCDS obd2 dongle to buy that works with this setup/software?
Thanks!

15-07-2019, 02:42 AM,

do 19.6 supports Long coddings? which version supports?

***ZIPPO4594*** · (This post was last modified: 23-07-2019, 14:34 PM by ZIPPO4594.)

Hi all !
anyone are tested VCDS 19.6.1 FRM (french version) with VcdsLoader 8.0 ?
thank you advance

***ZIPPO4594*** · 30-07-2019, 10:50 AM,

I installed the 19.6.1 with the loader 8; VCDS starts, but it says version 18.9.1, anyway as soon as you get into engine you get an error.. all in all I had to go back to 18.9.1, which works great.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	VCDS Atmega162 license Revoked FIX	Dubstu	0	136	18-05-2024, 06:14 AM Last Post: Dubstu
	frf to bin or full backup	matustn	0	46	15-05-2024, 10:37 AM Last Post: matustn
	VCDS Loader (Modded)	jtanner	5	496	06-05-2024, 18:24 PM Last Post: justdiag
	VCDS 23.11.0 + LOADER	benyclaudiu	15	3,900	02-05-2024, 07:15 AM Last Post: koldplayer
	VIIPlusLoader-08.024.01-FULL Free for all	greenhorn	1	1,659	22-04-2024, 19:13 PM Last Post: BIMMERSIMBA
	VCDS HEX V2 (china)	standaBMW	0	326	19-04-2024, 11:32 AM Last Post: standaBMW
	NEW VCDS all EU language 23.03.1	pitercie	5	675	17-04-2024, 06:11 AM Last Post: Karlos777
	Request: full VCDS scan Audi S3 2007/2008	ries	0	134	29-02-2024, 20:05 PM Last Post: ries
	MY VCDS COLLECTION - ALL YOU NEED I HOPE	fantomel	77	63,383	25-02-2024, 11:34 AM Last Post: XuLeTZ
	76 PLA / 3C Lane Change - Errors on VCDS scanning only	spooky75	8	577	08-01-2024, 11:12 AM Last Post: spooky75

Contact Us