+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Diagbox on windows 10 (/showthread.php?tid=32959)
Diagbox on windows 10 - blederik - 22-02-2018
Hallo everyone.
Does Diagbox function on windows 10?
If yes, which version do i have to gain?
Thank you.
RE: Diagbox on windows 10 - gaz1986 - 22-02-2018
Genuine versions of the latest diagbox work on windows 10. Currently the latest version is 9.21.
Kind regards
Gaz
RE: Diagbox on windows 10 - nek13 - 22-02-2018
I have 7.49 and it works perfectly, but I would install a newer version if it's a thank you link
RE: Diagbox on windows 10 - Simple - 22-02-2018
DiagBox versions 7.xx and 8.xx (including Lexia and PP2000 components) work on Windows 10 32bit, if the installation procedure is followed, inspite of the warning from PSA.
However, they (7.xx & 8.xx) will install on Windows 64bit, but Lexia and PP2000 components will NOT work on 64bit Windows..
RE: Diagbox on windows 10 - blederik - 18-04-2019
Hallo.
Please, isnt version of Diagbox where everithing function on windows 10 64bit?
Thank you.
RE: Diagbox on windows 10 - vagvag - 18-04-2019
(18-04-2019, 12:35 PM)blederik Wrote: Hallo.Diagbox under 64 bit windows will NOT work the inside lexia and pps........ They are very old and the 'code' from them not support 64 bit windows........
Please, isnt version of Diagbox where everithing function on windows 10 64bit?
Thank you.
So in your question for full support install under 32 bit windows or if you not care for the lexia and pps then ok install under 64 bit...........
Me personal i have the cracked 07.57 and 08.35 under windows 7 32bit and the online POI (aka EU edition) latest 09.45 under windows 7 64 bit........
Regarts........
RE: Diagbox on windows 10 - DoZe - 22-04-2019
Diagbox 7.57 Under Win10 ver1809 32 bit : NO Problem.
RE: Diagbox on windows 10 - DoZe - 21-06-2019
(22-04-2019, 17:01 PM)DoZe Wrote: Diagbox 7.57 Under Win10 ver1809 32 bit : NO Problem.
Just try installing and running v7.57 (7.01 pre-patched, 7.01 to 7.57 update) Under Windows 1903 (18362.175) :
7.01 : install : Ok, running : Ok
7.57 : update setup is "near" Ok :
At the end, a dos "boot loop" appears, a background service ask a firewall rule, i agree of course.
The bootloop continue. I decided to shutdown and restart.
After the reboot, try to launch : OK no prob, need to be tested on a car (as soon as i can).
AFTER TEST : NO prob, All is OK
